Rapid 136 Stainless Steel 5m Staples 2500

Our SIP rechargeable inspection lamp is perfect for the automotive industry.

The Metabo SSW 18 LTX Power Plus Cordless Impact Wrench has a 1/2 inch drive. This Compact Impact Driver is ideal for tough applications. The high torque abilities (220Nm) of this wrench make it suitable for tightening or removing the most stubborn of rusty nuts or bolts. This Driver also features the Variospeed (V) electronics and a special 3 speed change switch which comes in particularly useful when dealing with smaller fasteners. This tool also comes equipped with the standard Metabo multifunctional monitoring system to protect both the machine and the battery pack as well as the patented air cooled technology which enables faster charging and long service life of the machine. For convenience, this wrench also comes equipped with a robust support strap for securing the machine and an integrated worklight. Supplied with 2 x 4.0Ah Li-Ion batteries, a charger and a carry case. Specification Bit Holder: 1/2in Drive.No Load Speed: 0-900/0-1,650/0-2,300/min.Impacts Per Min: 0-1500/0-2700/0-3300/min.Max Torque: 100/140/210Nm.Weight: 1.6kg.

The UNION Hercules 1K57 padlock, has a vertical sliding shackle which comes through the staple hole making direct attack impossible. Insurance Graded CEN6 and accredited Sold Secure Gold, this lock is ideal fo use in commercial or high security applications. Supplied with 3 keys AVA Available with AVA 10 discKey retention when the padlock is unlockedHardened steel unsprung shackleSuitable for use with UNION 7B018 padbar Anti DrillAnti SawForce ResistantAnti PickTorque ResistantCorrosion Resistant Specification:Shackle type - ConcealedShackle diameter - 16mmShackle clearance - N/ALocking mechanism - Key

The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18 Volt DCH253 3 Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18 Volt DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.

Llave de amoladora angular Llave de máquina de corte ajustable Llave de amoladora de tuerca de seguridad ajustable Llave de pasador ajustable Llave de amoladora Llave ajustable

These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 1.3/4 x 7 Box 200