Gratis
Apoyo
For use on oily, slick, wet, cold or dry surfaces, this non-toxic, waterproof crayon is ideal for timber, concrete, ceramics and metal.Card of 2Colour Red
The Makita HM1317C Demolition Hammer offers high durability and excellent demolition performance. Suppression of motor speed during no-load reduces vibration of the tool body. The unique Makita AVT Anti-Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. Supplied with: 1 x Bull Point, 1 x Side Handle and 1 x Carrying Case. Specification: Input Power: 1,510W No Load Speed: 730-1,450/min Impact Energry: 21 Joules Shank Size: 30mm Hex Weight: 17kg Vibration Chiselling: 8.5 m/sec² Vibration K Factor: 1.5 m/sec² Noise Sound Power: 101 dB(A) Noise Sound Pressure: 81 dB(A) Noise K Factor: 2.4 dB(A)
The Stanley medium pile Silver Stripe roller sleeve is ideal for use with emulsion and water-based paints. It has a long life, and provides an excellent all-round performance, coverage and finish. It is made from woven polyacrylic fabric and is suitable for smooth and semi-rough surfaces. Size: 230mm (9in).Pile height: 12mm.Diameter: 44mm (1.3/4in).
Used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes. For best performance power drill should be held in a stand. For a perfect grain match use an offcut from the timber being plugged. To ensure an acurate fit we suggest you use the same screwsink from the Faithfull brand. The set of 4 contains sizes No 6, 8, 10 and 12.Cuts Size 10 Plugs (10mm)
Replacement irons (blades) are available for all Stanley block and specialist planes.All Stanley replacement plane irons are made from chrome carbon steel which has excellent edge retention characteristics and allows a razor sharp edge to be honed.All cutters are fine rotary ground to give a flat surface that is easier to sharpen.G : Denotes suitable for old style planes.To fit 112060 Plane 60. 1/2G.(old style)Size of Cutter 1.3/8in
These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a ‘Fully Threaded Cup Square Hex Bolt’, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Carriage Bolt & Nut ZP M10 x 50 Bag 10
