Gaerne G.Hybrid, boots gore-tex

Features
Sportive Air Vent gloves made of soft leather, through the mesh material the perfect choice for the summer So that navigation devices and smartphones can also be operated with the gloves, there is a special touch-sensitive fabric at the tips of the index finger and the thumb incorporated Inside, the Axis is processed with a soft polyester lining Hard ankle protectors and pads on the fingers and palm provide added protection Velcro closures ensure a good fit

Outer shell
100% polyester (waterrepellent PVC coating) Fit/features
1 external pocket integrated, waterproof compartment 3M SCOTCHLITE™reflectors carrying handle all-round zip for volume adjustment Fastening
Velcro System Sizes
8 - 14 ltr.

brightens & improves hydration blueberry brightens the appearance of dark spots white tea helps even out skin tone and reduces the appearance of fine lines moisturises skin so that complexion looks revitalized and radiant fail-proof answer to flawless skin in minutes

AC 1- 5V 2 Pins Passive Electronic Piezoelectric Piezo BuzzerDescription:Plastic housingConvenient for connectingThey have good characters like small cubage, low wastage and high voice pressure.Specification:Working Voltage: AC 1-5VBody Size(pin not included):14 x 7mm/0.55 x 0.28(approx)Pin Pitch:8mm/0.3(approx)External Material:PlasticColor:BlackFunction:It is applied to a variety of electrical products of alarm and voicePackage Included:1 X Passive Piezo Buzzer

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Description:7 1/2 x 8 -BA Aluminum Outboard Prop Propeller for Yamaha 4-6HP 6E0-45941-01-00Specification:Material: AluminumBlades: 3Size: 7 1/2 x 8 -BADiameter: 7 1/2Screw Pitch: 8Color: WhiteProp Rotation: rightUse for: OutboardHub/Bush:1. Thru hub exhaust, 9 tooth/spline propeller2. Rubber hub installedFitment:For Yamaha 4hp 5hp 6hp 4A 4M 5M 5C F4 F6L F6S F6C F5A Outboard Motors 6E0-45941-01-00Package Included:1 X Outboards Prop Propeller