Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 4.0mm (5/32in)Length: 100mm (4in)
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type.MF214.Size. 100 x 6mm (4 x 1/4 in).Grade.Medium.
BlueSpot 20 piece cleaning and polishing set comprising the following: 3 x 1in Polishing wheels.1 x Polishing compound.1 x Felt polishing wheel with shank.3 x Nylon brushes: 7/8in, 1/2in, 1/8in nylon brush.1 x 7/8in Steel brush.2 x Mandrels.2 x 7/8in Emery polishing wheels.1 x Felt polishing tip.6 x 1/2in Felt polishing wheels.
Marshalltown M192 cement edger designed to give a good finish on steps and verges. Stainless steel blade with sturdy mountings. Light and easy to handle with comfortable DuraSoft® handle. Size: 250 x 100mm (10 x 4in).Straight Ends with 10mm (3/8 in) Radius.
The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18 Volt DCH253 3 Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18 Volt DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.
Designed for use with angle grinders with a compatible thread and are suitable for industrial use and more specialist applications. Twist knot wire brushes are suited to heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Wire: High tensile twisted steel Type: CupFace Diameter: 100mmThread: M14 x 2Wire: 0.5mmConforms to ISO 9001 and DIN EN1083-1 and 2Maximum rpm 8500
