MOMO Raptor Jethelm Schwarz Matt / Dunkel Silber Schwarz Grau M L

Visier passend für:Bandit XXR Bandit SS Bandit Crystal Bandit RX8 Superstreet II

SPIDI Traveler 2 is an ideal blend between adventure touring and sport touring capabilities. Its short cut, along with the aerodynamic design, provide greater comfort at high speed. Safety
Prepared for back protector Lev. 1 and lev. 2 Force-Tech removable protectors EN 1621-1:2012 shoulder and elbows protectors
Comfort
Removable lining with wadding 100 gr. Prepared for thermo lining L30 man (not included) Vented H2OUT lining
Performance
Two jackets in one Waterproof outside pocket Vents Zip fastener to join jacket/trousers Average weight 2,0 Kg
Ergonomy
Integrated adjustment system Ergofit System Adjustable waist fastening Draw-ties for reducing the volume of sleeves and chest Adjustable drawstring tightening Adjustment and EST fastening
Materials
High tenacity polyester fabric Reflex zones for night-riding Punched mesh fabric
Maintenance
Wash by hand below 40 °C Do not bleach Drip line drying Iron at maximum sole plate temperature (110 °C) Do not dry clean Do not wring

Specification:Product Name: Tail Lamp lightLens Primary Color: BlackMaterial: ABS Plastic,PPPlacement on Vehicle: Rear Left/RightBulb:Not IncludedSize:39x 31x 14.5cmFeatures:- Made of good quality material.- Replacement on the original light only.- Durable and long service life.- A perfect aftermarket replacement.Fitments (For the reference):For Mitsubishi Triton L200 2015-2018Note:1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.2.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3.There are no instructions included in this kit.Professional Installation Is Highly Recommended!Package Include:1x Right/Left Tail Light

Helmet Technology
Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, quick release screw on face shield that is optically correct, compound-curved, scratch-resistant and protects against UV-rays Ventilation: 10 points of aerodynamically designed flush fit ventilation with chin, top, rear, and unique side extraction vents. 5 intake vents and 5 exhaust vents Inner sun shield: Smoke tinted inner flip down sun shield system with left side slide lever Visor: A removable and adjustable (40mm) screw-on visor 7 in 1: Helmet can be configured one of seven different ways. Ships with all parts included This helmet model meets or exceeds both ECE 22.05 and DOT FMVSS-218 motorcycle helmet safety standards Retention system is microlock (quick release) A clear coat finish to protect paint & graphics A large-size FX-55 weighs 1.68 kg or 3.69 lbs
Removable, washable and custom sizable Interior AFX helmet liners and cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable and washable. The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness and cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner and cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block.

Helmet Shell & EPS Size XS-M L-XXL



XS S M L XL XXL

Check Pad Thickness (mm) 40 36 32 28 24 20

Comfort Liner Thickness (mm) 12 10 8 10 8 6

Dragon Evo helmet represents the maximum expression of Premier s experience and knowledge on composite fibres. In the Dragon Evo version, the shell was revised and the ventilation system is completely new. The shell is made with a DCA three-composite material, a perfect mix of dyneema, carbon and aramidic fibers in order to obtain the ideal outcome both for lightness and resistance. The shape of the shell is aerodynamic and is the result of careful laboratory tests, but most of all it has been tested on motorcycle s tracks in extreme conditions, thanks to the experience of international racers. Features
Lining: high quality, removable and washable Effective air-flow ventilation 2.2 mm thick safety visor Chin ventilation Air-flow ventilation aerodynamics Best materials for your safety 2 shell sizes Clear visor, anti-fog and scratch resistant QRS Quick Release System (Visor change) Dynamic adjustable chin and head ventilation Double D closure Weight 1.290g ECE 22-05 approved

Technologie de S.E.P. technologie de compression en tricot anatomiquement, tricoter pour L + R lié couture main rembourrage divers temps de séchage rapide bandage d’anneau pour un parfait ajustement sans odeur température de régulation à membrane technologie en tricot taille = portée du mollet sur son point le plus large en cm S (24-32), M (32-38), L (38-44), XL (44 À 51)