Gratis
Apoyo
Weather type
Summer
Lining
Mesh
Visibility
Side Eye Night Eye
Ventilation
Mesh panels
Protection
backprotector prepared protector shoulder & elbows
Other specs
Coat hanger Jeans loop
* "lighter picture" shows the night eye effect
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
From urban street crowd straight into high-speed curve paradise, and with the the same helmet? No problem for the brand new exo-300air! with few simple steps can be all-rounders of the open face helmet into a full-City Face Helmet rebuild. The exo-300air the additional advantages of its high top comfort and fit. Airfit Concept Airfit⢠permits a rider to personalize helmet fit through air adjustable cheek pads with additional noise reduction.Only by SCORPION EXO! Kwikwick2® inner lining LINER:Very effective, hypoallergenic, removable, machine washable, and very soft and pleasant to the touch, the KwikWick2® lining of the new ScorpionExo® 2011 range is a real custom-made slipper for your head. Features
Advanced Polycarbonate Composite Engineered Shell: Quiet, aero-tuned design for wind-tunnel tested comfort. EPS-lined chin bar for additional protection. Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet. 5 available sizes from the XS to the XL Micrometric Automatic chinstrap buckle for quick release and precise adjustment. Certified as Open Face and Full Face helmet! This helmet comes standard with a clear visor.
Icon Variant Pro Ascension HelmDer Variant Pro Ascension™ bietet einen lizenzfreien Mix aus Techno-Beats und Trance-Vocals. Hier gibt es keine Euro-DJs mit halbem Hemd, nur die gebrochenen Linien des prismatischen Tempos ändern sich. Nehmen Sie die BPM ein paar Klicks auf und lassen Sie Qbert sein Ding machen.Eigenschaften:Robuste Glasfaser- / Verbundschale Die mittelovale Kopfform wurde im Windkanal getestet und verfeinert Visier mit niedrigem Luftwiderstand Umfangreiche Entlüftung mit EPS-Kanälen mit hohem Durchfluss Optisch korrekter Schnellwechsel-Gesichtsschutz ohne Beschlag 5-teiliges modulares Hydradry™ feuchtigkeitstransportierendes Futter ECE 22-05 (Europa) Spezifikationen:Passform:Der Intermediate Oval-Kopf ist der am häufigsten verwendete Helmtyp und von vorne nach hinten etwas länger als von Seite zu Seite. Belüftung:8 Lufteinlässe und 2 Auslassöffnungen in Verbindung mit einer tiefen Kanalisierung des energieabsorbierenden EPS-Schaums im Innenraum sorgen für eine hervorragende Belüftung des Helms. Gewicht:Präzise Montagetechniken helfen, das Schalenprofil drastisch zu reduzieren und einen Helm herzustellen, der außergewöhnlich leicht ist. Außen:Die mit Windkanälen veredelte Schale, die in einer Fiberglas / Dyneema / Carbon-Matrix ausgeführt ist, bildet eine solide erste Verteidigungslinie. Das charakteristische Visiersystem des Variant Pro sieht nicht nur aggressiv aus, sondern trägt auch zur Verbesserung der Sicht bei, indem es dazu beiträgt, helles Sonnenlicht auszublenden und gleichzeitig minimale Auftriebseigenschaften zu erzielen. Visier:Das beschlagfreie Variant Pro™-Visier in Verbindung mit einer neu geformten Augenöffnung erhöht die periphere Sicht und erzeugt eine unvergleichliche verzerrungsfreie Sichtlinie, sodass Sie den Preis stets im Auge behalten. Innen:Das fünfteilige schweißableitende Hydradry™-Futter bietet eine größere Anzahl an Anpassungskombinationen für jede einzelne Kopfform. Kronen-, Längs- und Achternpolsterkomponenten ermöglichen die Verwendung von 27 Kombinationen in einer einzigen Schale; doppelt so hoch wie die Konkurrenz des Variant Pro. Im Lieferumfang enthalten:1x Icon Variant Pro Ascension Helm 1x klarer beschlagfreier Variant Pro Precision Optics™-Schild 1x sublimierter Hydradry™ Liner Hinweis: Wird nicht mit PSC- oder MFJ-Zertifizierungsaufklebern geliefert, es sei denn, es wurde von einem autorisierten Händler in diesem Land erworben.
The Forcefield Upgrade back protector inserts are designed to replace existing back protector inserts and comply with the EN1621-2: 2003 Level 1 standard. With Nitrex® a unique high-tech shock-absorbing material, energy can be scattered and absorbed, and evenly distributed over the Nevertheless, the protector is flexible and comfortable. The materials used can withstand repeated impacts. A combination of technology and Multi Nitrex layers allows Forcefield to manufacture more lightweight and flexible protectors. This allows the body to move without being restricted. The unique triangular Nitrex grids have been designed to allow breathing holes at the base for breathability, and this also reduces weight. Features
Approved to: EN1621-2: 2003 Level 1 Protector strength: 15.5 mm
Features
waist look long connection zipper racing style suitable for use in summer
Protection
knee sliders safe tech protection at knee, shoulder and elbow backprotector prepared
