Denso Flashing Tape Primer is a brush applied solvent-based primer, used for priming surfaces prior to the application of Denso Flashing Tape. Composition: Solution of oxidised bitumen in aromatic hydrocarbon solvent.Cleaning solvent: White spirit. Specifications:Drying time: 20 - 30 minutes. Covering capacity: 7 - 8m² per litre. Application temperature: 0°C to 55°C. Solids content: 58% of weight. Volume: 1 litre.
Medium flexibility grinder pads suggested for 60+ finer grits. It's unique flexibility and durability make this our best selling pad. This range can be considered for universal use. Made in Great BritainType. 116-14MTo suit. 125 mm Mini Grinders.Thread.M14 x 2. Abrasive Disc Size 125 mm x 22 mm (5in). Machine Fitted :-AEG, Black and Decker, Bosch, Casals, ELU, Fein, Flex, Hitachi, Holzher, Kress, Makita, Manson, Metabo, Perlea, Ryobi, Stayer, Teksan. Pin Spanner - Red
Bahco Combination Pliers used for both holding and cutting. The jaws are slimmer than standard products, have smoothly rounded contours to provide maximum accessibility and have a phosphated and anti-rust protected finish. The handles of these pliers are designed to allow the vast majority of users to apply the greatest possible force with the least amount of effort by combining hard polypropylene for the core and a softer elastomer for the surface. This combination of materials provides a firm, non-slip grip for the hand.These Bahco Combination Pliers have the following specification: Length: 180mm (7in).Jaw Length: 38mm.Cutting ;Capacity: ;Piano: ;1.4mm, Hard: ;2.0mm.Weight: 252g.
This Teng Tools ratcheting combination spanner combines an open ended spanner with a 72-tooth 12-point ring ratchet. The ratchet has a 'flip reverse' feature, which switches the direction of the ratchet, and it is offset at a 13° angle for ease of access. Both ends are of the same size. The spanner is made from chrome vanadium steel for strength and durability, and has an attractive satin finish.The TEN600515R Ratchet Combination Spanner has the following specifications:Size: 15mm.Length: 200mm.
Delivering extremely low vibration levels, the DeWALT D25414KT uses active vibration control with a floating back handle, which increases user comfort and safety whilst allowing for extended periods of work. Featuring a rotation-stop for light chiselling applications, render and tile removal, the electronic variable speed switch provides total control for users, while the optimised power to weight ratio provides good power in light weight package.Guaranteeing flexibility, precision and speed, the D25414KT includes not only a quick change 3 jaw chuck, but also an impact stop for drilling/screwdriving through wood, steel and ceramics. It also features an industrial quality SDS-Plus Chuck with a capacity up to 32mm in concrete.
