Teng 600506 Combination Spanner 6mm

The IRWIN Jack Xpert range of handsaws have evolved into super-efficient cutting tools that have University verified technology at their heart. This triple-ground tooth technology (TGT) not only increases efficiency but also optimises cutting performance on both the push and pull strokes - so you dont have to work so hard. Hardpoint tenon saw with soft-grip handle for user comfort. The ideal choice for fine carpentry and can be used with a mitre box.Size: 300mm (12 in).Teeth 12 tpi

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool.Ideal for drilling, countersinking and counterboring in one operation.This means that a No.8 Screwdigger can be adjusted to predrill for different lengths of No. 8 Screw.Uses 7/64in Drill Bit.To ensure an acurate fit we suggest you use the same Plug Cutter from the Disston brand.For No 8 screw

Masajeador muscular eléctrico de 12 V Percusión portátil Vibrante Pistolas de masaje potentes Masajeador muscular de tejido profundo de mano para cuello Espalda Hombros Pie pierna

Stabila 196-2E Electronic Level with IP65 protection against water and dust. This professional quality level with electronic inclinometer is ideal for carpenters, joiners, kitchen builders, metalworkers, formworkers, construction engineers, pipe fitters and many more.The Electronic inclinometer has a dual display for accurate easy reading of inclinations in all positions. A second display located in the upper surface for easier reading of the measured value. With angle indication in degrees, percentage, mm/m, in/ft. Accoustic signal for horizontal and vertical measuring, audible inclination guide with three different signal tones allowing the user to arrange elements without having to look at the spirit level. With automatic switch off can be selected after 10min or 2 hours. As a spirit level it has extra long ribbed profile providing a high resistance to deformation during everyday use on site and a permanently moulded precision vials for overhead reading - no readjustment required. It has removeable endcaps for measuring flush into corners, a special coating to protect level against dirt and ruberised handholes for easier handling. Measuring accuracy of electronic module @ 0° and 90° 0.05° @ 1° and 89° 0.2° Measuring accuracy of spirit level: in normal position: 0.029° = 0.5mm/m, and in upside down position 0.029° = 0.5mm/m. Protection Class: IP65.Stabila 196-2 Electronic Spirit Level. Length: 600mm (24 in).

The Monument MON2050 2050L Gas Meter & Radiator Bleed Key for releasing the air which can appear in a radiator and for opening gas meter cupboards.Made in Britain from engineering plastic.

The DMT D9 Diamond sharpening bench whetstone has non-slip feet and will not break, chip, crack, hollow or groove. The D6 whetstone is made from the hardest material which is one of the most efficient sharpening abrasive. Available in unique interrupted surface and continuous surface, light pressure produces a sharp edge with just a few strokes. Use water for lubrication no oil, smell or mess and can hone ALL hard materials: carbide, steel, etc. and is supplied with Non-skid mat. Precision, continuous monocrystalline diamond bench whetstones with rubber feet. The grit size is etched into the side of the whetstone. The grits are denoted by a dual coloured circle which is set into one end. Blue: Coarse Grade 325, 45 micron.Red: Fine Grade 600, 25 micron.Green: Extra Fine Grade 1200, 9 micron.Red: Fine 600g, 25 micron