Metabo TKHS 315M 300mm Site Saw 110 Volt

Forge aluminium value door handles. Sprung lever on backplate. Fixings included. Fitting Instructions:1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a Bradawl.2. Drill Ø2mm Pilot holes and reposition the handle before securing using the wood screws provided.Designed to be used with a Euro cylinder mortice lock with centres of 57mm.

The Faithfull FAIPLANE912 is a 9.1/2 Block plane seated at 21º with a 42mm cutter width. The planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. Presented in a hinged wooden box. Cutter Width: 42mm.Overall Length: 160mm.

Faithfull versatile flexible sanding pad, double sided and washable, can be used on wood, paint, metal and plaster, wet or dry and even with chemical paint strippers. Pack of 10.Ultra fineColour - grey

Monument Tap Reseating Tool 1/2 inch re-cuts the seats of worn taps or stopcocks without disconnection from the pipework.Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series. Cutters are case hardened. The feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits old series 1/2 in BS1010 flat seats. Complete with 17 and 19mm (11/16 in and 3/4 in ) flat cutters and a tapered cone.

Olympia Tools Bolt Cutter Centre Cut with compound action blades that are made from high carbon alloy steel blades, hardened and tempered, heat treated. Have a secure rubber grip, and are ideal for cutting wire, chains and bolts.

Made from unbreakable and shatterproof ABS. The handle, pocket clip and blade are insulated for maximum safety. Made to VDE specification 0680- Part 6 - 4.77 To test the circuit place the screwdriver end on the electric contact and press your thumb against the metal contact next to the neon viewing window, if the contact is live the bulb will light. IMPORTANT:-Check that the neon bulb is in order by using the tester first on a known live circuit.Never touch the uninsulated part of the blade when testing.Size: Blade length 57mm (2.1/4 in)