Irwin Aviation Snips - Left Cut

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

Jetcem is a specially formulated rapid setting cement based patching/repair compound which, when mixed with water, sets in about 30 minutes. Rapid setting (30 minutes, depending on ambient temperature and conditions).Easy mixing, just add water.Fills up to 25 mm in one application (for deeper holes in excess of 25 mm use Jetcem Premix sand/cement) Benefits: Internal and external repairs to gaps and cracks and walls and floors.Repairing flags, slabs, stones and bricks.Patching steps and window sills.Pointing brick and stone.Jointing earthenware pipes and drains.Repairs to ponds and pools.Setting in W/Cs and sinks.Leak sealing in concrete based surfaces.Setting railings and posts.This pack comprises 4x 3kg Jetcem Rapid Set Cement.

Faithfull flexible latex impregnated waterproof backing paper coated with an aluminium oxide abrasive. Used wet or dry for sanding paint, primer and body filler. Coarser grades are ideal for removing major imperfections, finer grades are ideal for final painting. Super fine grades allow exceptionally fine finished to be achieved, especially when used wet. These sheets can be cut to any size, making them very versatile for use in assorted applications. C-weight paper on grades C60-C180.A-weight paper on grades A240-A1200.Pack quantity: 25 Size 280 mm x 230 mmGrade: C180

IRWIN Vise-Grip Fast Release™ curved jaw locking pliers with wire cutter. Has a one-handed, triggerless release that is 2 times easier to open than traditional locking pliers. Anti-pinch, non-slip ProTouch™ grips provide comfort, control, and less hand fatigue. Curved jaw puts tremendous pressure on four points of any style nut or bolt head, making it perfect for any application that requires maximum torque. Constructed from high-grade heat-treated alloy steel for maximum toughness and durability. Hardened teeth are designed to grip from any angle. Adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release. Backed by the IRWIN VISE-GRIP Lifetime Guarantee.Irwin Vise-Grip 5WR Fast Release™ Curved Jaw Locking Pliers. Length: 125mm (5in).Capacity: 29mm.

These Forgefix flat Bellwire Clips have hardened masonry nails for increased efficiency, and which will fix into timber, blockwork and mortar. The nail should not be hammered directly in brick, and fixing into mortar is recommended. Application:For fitting bell wire cable to timber or masonry in audio, visual and both commercial and domestic cabling.Cable Clip Flat White 1.50mm Box 100

A built-in digital camera with 4x zoom is aligned to the laser measurement device and provides long range targeting, even when the laser dot is not visible. The unique combination of digital Pointfinder and 360° tilt sensor allows measurements which are not possible with conventional distance meters. The DISTO™ D510 uses Smart Horizontal Mode to calculate the correct horizontal distance, taking out the error produced from out of level measurements, allowing measuring beyond obstructions or taking indirect measurements. Bluetooth® Smart technology allows data transfer to smartphones and tablets. In addition to the smart free App Leica DISTO™ sketch, there is also a host of other Apps to allow you to work efficiently and avoid typing errors when recording measurement results. The DISTO D510 kit is also supplied with the following, in a rugged case: Leica FTA360-S adaptor: Sturdy adaptor with fine drive for convenient and precise targeting. The adaptor eases the task of targeting over long distances, and results in minimum discrepancies when taking indirect measurements. Fits all Leica DISTO™ and Lino products with a ¼ “ thread and is designed to be used in combination with the Leica TRI 70 or TRI 100 tripod. Leica TRI 70 tripod: The small portable tripod provides a stable base for more accurate measurements. It is intended for everyday use, features include easy fine adjustment and a bubble level. Extendible length from 0.40 m to 1.15 m. Ideal with the Leica TA360 or FTA360 adaptor. Distance Area & Volume calculation Plus & minus calculation Tilt Sensor (360°) Stake Out Timer Indirect Measurement Pythagoras (3 point) Tracking (incl. min/max) Memory – last 30 measurement recall