Visegrip 5WR Fast Release Curved Jaw Locking Pliers 125mm 5in

Botella de 2pcs Original TaiWan Pro'sKit MS-035 Flux con fino con punta de aguja

These Forgefix Pozidriv Self-Tapping Screws have countersunk heads and are Zinc Plated for increased resistance to corrosion. They tap their own thread in to a pre-drilled pilot hole in sheet or solid material. They are single threaded to resist pull-out. APPLICATION:Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish.Self Tapping Screw Pozi Countersunk ZP 3/4 x 6 Box 200

Faithfull Centre punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.Point Diameter: 1.6mm (1/16 in)Length: 100mm (4 in)

Bahco S138 1/4in, 3/8in, and 1/2in drive 138 piece metric and imperial socket set that consists of: 12 x 1/4in Hexagon Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, and 13mm. 10 x 1/4in Hexagon Deep Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12, and 13mm. 1 x 1/4in Reversible Ratchet 60 Teeth and Two Component Handle 150mm. 1 x 1/4in Spinner Handle with Two Component Handle 150mm. 1 x 1/4in Sliding T-bar 106mm, 1 x 1/4in Extension Bar 50mm, 1 x 1/4in Extension Bar 100mm, 1 x 1/4in Universal Joint, 1 x 1/4in Bit Holder, and 1 x 1/4in Flexible Extension Bar 150mm. 16 x 3/8in Hexagon Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, and 22mm. 1 x 3/8in Reversible Ratchet 60 Teeth and Two Component Handle 200mm. 1 x 3/8in Spark Plug Socket 21mm (13/16in), 1 x 3/8in Spark Plug Socket 18mm, 1 x 3/8in Spark Plug Socket 16mm (5/8in), 1 x 3/8in Universal Joint, 1 x 3/8in Extension Bar 75mm, and 1 x 3/8in Extension Bar 150mm. 18 x 1/2in Hexagon Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 32, and 34mm. 9 x 1/2in Hexagon Sockets: 3/8, 7/16, 1/2, 9/16, 11/16, 3/4, 13/16, 7/8, and 1.3/16in. 1 x 1/2in Reversible Ratchet With 60 Teeth and Two Component Handle 250mm, 1 x 1/2in Sliding T-bar With Double Function, 1/2in Head 3/8F-1/2in Male Adaptor, 1 x 1/2in Extension Bar 125mm, 1 x 1/2in Extension Bar 250mm, and 1 x 1/2in Universal joint. 1 x Bits Adaptor: 1/4in Square Drive. 4 x Pozidriv Bits: PZ 0, 1, 2, and 3. 5 x Phillips Bits: PH 0, 1, 2, 3, and 4. 3 x Flat Bits: 4, 5.5, and 7mm. 6 x Insert Bits: 3, 4, 5, 6, 8, and 10mm. 9 x Torx Bits: T 8, 10, 15, 20, 25, 27, 30, 40, and 45. 1 x Bits Ratchet, 3 x Hexagon Keys: 1.5, 2, and 2.5mm. 8 x Crow Foot Wrenches: 10, 11, 13, 14, 15, 17, 18, and19mm 13 x Combination Spanners: 7, 8, 9, 10, 11, 12, 13, 14, 15,16, 17, 18, and 19mm. Supplied in a High Density Polythene Case.

These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.

Wera Series 335 Parallel tipped slotted screwdriver with chrome plated and hardened steel blades. The Wera Lasertip tip bites into the screwhead, reducing cam out (prevents slipping out of the screw head) and eliminating the need for two handed screwdriving. The patented ergonomic multi-component Kraftform handle has been designed for faster more powerful and less tiring screwdriving action.