Ixon Vortex Women's Pants, black-pink, Size 2XL, black-pink, Size 2XL for Women

Junior riders and kids crash. Sometimes hard, and then sometimes very hard! Now there is finally a solution that will minimize the risk of a head and brain injury, and that is to get the best junior/kids helmet you can find that reduces both rotation and impact energy to your head and brain! The GPX 4.5 Injected Polymer Compound helmet offers world-class protection with 360 ? Turbine Technology. Turbines made of an energy absorbing material, are set inside the helmet. This technology has two main advantages, namely reducing rotational acceleration to the head and brain and the absorption of energy upon impact at concussion level. It also has a smaller outer shell volume, which assists in reducing rotational acceleration of the head and brain, proving that a smaller helmet shell is better. Our multi-density, V-shaped impact foam is molded directly to the outer shell, enabling us to reduce the outer shell size and still achieve the highest level of impact protection. This unbeatable combination makes all Leatt riders winners. The helmet also provides ample ventilation, another feature most of us cannot get enough of and, most importantly, these vents work even at very low speeds. So, the next time a junior rider crashes, see to it that he is properly protected! Features
Injected Polymer Compound Shell 360° Turbine Technology Reduces up to 30% of head impact at concussion level Reduces up to 40% of rotational acceleration to head and brain Reduced Outer Shell Volume A 10% smaller shell, transfers up to 20% less rotational forces to the neck, head and brain Multi-density, V-shaped impact foam molded directly to the outer shell significantly reduces G-forces transferred to the head and brain New Dri-Lex® moisture wicking, breathable, anti-odor and washable inner liner Optimal Neck Brace Compatibility Maximized ventilation optimized for off-road racing and effective even at very low speeds Visor with breakaway function for rotational reduction in a crash Emergency cheek pad removal Hydration ready (with optional hands-free kit) Certified and tested: ECE 2205 or DOT Weight: ECE from 1150g
Sizes
M: 51-52 cm L: 53-54 cm

Description:1. 100% brand new and high quality.2. Rebuild kit fits for VW 191 798 211.3. 5 tpyes complete kit to rebuild your Car.Feature:Name: 1 Set Of Shifter Gear Shift Bushing Repair KitModel: 574952Material: Plastic+Rubber+SteelSize: As The Picture ShowsQuantity: 15pcsPackage Included:1 X Set Of Shifter Gear Shift Bushing Repair Kit

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Courroie Cuir de vache avec la couverture d'unité centraleConfort / caractéristiquesboucle en métal de haute qualité ornements à la mode tailles Largeur : 40 mm Longueurs : 85, 95, 105, 115, 125 couleur noir

Features
Lightweight Protection: Stone shield constructed with energy dispersing molded panels Support: Adjustable elastic torso strap with ratcheting buckle closure Strategically placed ventilation ports for maximum cooling Soft chassis liner molded for maximum comfort European Standard EN 14021:2003

Internal certified back protector for Fit for Lady items.
It is certified for heights up to 156cm. Under current legislation, this protector provides protection to all areas of the body, and is therefore suitable for use within the above measurements. The structure of Back Warrior Z64 is a multi layered sandwich of materials, the first one of which is stiff and spreads the shock, while the second and third are progressively softer and absorb the energy of impact. The cubes shaping the inner and outer surface of Warrior Back are able to absorb and additional 20%of impact energy more than a simple plain surface, all while maintaining a great abrasion resistance.
The inner surface has also been shaped in order to guarantee air circulation thus maintaining comfort, especially in warm climates.
The peculiar shape and surface structure also make for a greatly flexible and light protector, easily storable, quick to equip and comfortable for every kind of riding position.
Measures: H 35cm - L 26cm