15 unids / set 6mm-50mm Diamond Coated Hole Saw Taladro Bit Cutter Core Shaft Tool Kit para cerámica de vidrio de porcelana de mármol 6/8/10/12/14/16/18/20/22/25/26/28/30/40 / 50 mm

These Forgefix traditional slotted, single thread Wood Screws have countersunk heads and can be used in many internal and external applications. They have a solid brass construction to avoid corrosion. APPLICATION:Used for both decorative and in applications where the screw may come in to contact with the elements avoiding corrosion.Can be used with all manner of wall plugs. Slotted screw driver required. With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. The single threads have been designed to offer higher pull out values and quicker insertion.Wood Screw Slotted Countersunk Solid Brass 5/8 x 4 Box 200

The Master Lock Excell™ Laminated Steel Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel, and dual ball bearing locking mechanisms for maximum pry resistance. The laminated steel padlocks are built for strength, with stainless steel and zinc outer components for exceptional weather resistance. They have either a precision 4-pin or 5-pin cylinder and recessed rivets that are chisel resistant. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: gates, sheds, storage units, fences, containers and chains.The Master Lock M1EURT has the following specifications: 2 x 45mm Excell™ laminated steel padlocks - Octagonal boron carbide shackle, 8mm diameter - 4-pin tumbler cylinder - dual ball bearing locking - keyed alike

These Forgefix Pozi Carcass Screws have an extremely coarse single thread. The have a black phosphate coating for increased durability and a self drill point for easy installation. APPLICATION:Designed specifically for chipboard and MDF (medium density fibre) board and carcass assembly. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Coarse thread screws have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Carcass Screw Pozi SCT Black Phosphate 4.2 x 45mm Box 200

Ganchos magnéticos de 8 piezas Juego de ganchos de imán de neodimio para trabajo pesado Juego de ganchos individuales magnéticos de 8 piezas

Single or Double white plastic wall sockets. 13 amp rating. Available switched or unswitched.13 Amp 2 Gang switched socket White

The DEWALT DCK654P3T XR Compact TSTAK­ Kit, contains the following: 1 x 18 Volt DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.Weight: 1.3kg. 1 x 18 Volt DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18 Volt DCS355 XR Cordless Oscillating Multi-Tool delivers up to 57 percent more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mm.Weight: 1.06kg. 1 x 18 Volt 125mm DCG412 XR Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18 Volt 165mm DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. No Load Speed: 3,700/min.Max Cutting Depth: 90 degree : 55mm, 45 degree : 42.1mm.Blade: 165 x 20mm Bore.Weight: 3.8kg. 1 x 18 Volt DCH273 Brushless XR 3 Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm.Impact Energy: 2.1 Joules.Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mmWeight: 3.1kg.