Airoh Twist Leader, cross helmet

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Specification:Product Name: Weed Eater Spool Line + Trimmer CapMaterial: PlasticMetalSize:MPN: 385022-03Color: BlackOrangeType: Trimmer Spool LineQuantity: 3pcsFitment:For BlackDecker:NST2018 Type 1 18 Volt 12 Cordless For GRASS ForHOG Trimmer / EdgerNST2018 Type 2 18 Volt 12 CordlessForGRASS ForHOG Trimmer / EdgerCST1100 Type 1 9 Cordless Trimmer EdgerCST1100 Type 2 9 Cordless Trimmer EdgerCST1200 12 Volt 10 Cordless Trimmer / EdgerGH600 Type 1 14 Automatic Feed Trimmer/EdgerGH600 Type 2 14 Automatic Feed Trimmer/EdgerGH600 Type 3 14 Automatic Feed Trimmer/EdgerGH600 Type 4 14 Automatic Feed Trimmer/EdgerST7700 13 Automatic Feed Trimmer/EdgerNST2018L Type 2 18 Volt String TrimmerST6600 Type 1 13 String TrimmerST7000 Type 1 13 Trimmer / EdgerCST1000 Type 1 Cordless String TrimmerCST1000 Type 2 Cordless String TrimmerCST1000 Type 4 Cordless String TrimmerCST1000 Type 3 Cordless String TrimmerCST1000 Type 5 Cordless String TrimmerCST2000 Type 1 12 Inch Cless String TrimmerGH400 Type 1 12 String TrimmerGH400 Type 2 12 String TrimmerGH400 Type 3 12 String TrimmerGH400 Type 5 12 String TrimmerGH500 Type 1 12 String TrimmerGH500 Type 2 12 String TrimmerGH500 Type 3 12 String TrimmerGH500 Type 5 12 String TrimmerGH500 Type 6 12 String Trimmer74526 Type 1 14 StringTrimmer78354 Type 1 9 Cordless Trimmer / Edger78354 Type 3 9 Cordless Trimmer / Edger78354 Type 4 9 Cordless Trimmer / EdgerNST2118 Type 1 18V String TrimmerGH610 String TrimmerLST220 Type 1 20V String TrimmerLST220FC

FOX Racing Raptor Protektorvoller Körperschutz durch Kunststoff-Seitenplatten verstellbare Schultern für die Kompatibilität mit einem Nackenschutz Low-Profile-Design: passend unter oder über dem Hemd Schnallen bieten genaue Anpassung und unkomplizierte Entfernung Double-Layer-Bio-Schaumsystem für höchsten Tragekomfort Größeninformation:Groesse S/M: 80 bis 101cm Brustumfang Groesse L/XL: 102 bis 122cm Brustumfang

Description:Euro LightsFastEasy InstalledLamp with long life expectancyWaterproofWeatherproof and 100% Rust FreeSpecification:Product Name:Turn Signal LightMaterial: PlasticColor: Yellow,clear,tanSize:120x45x53mm(LxWxH)Surface Finish: PlasticManufacturer Part Number: 002001-0197Placement on Vehicle:Front ,Rear,Left, RightFitment:For BMW F 650GS 2008-2012For BMW F 800GS 2008-2012For BMW F 800R 2008-2014For BMW F 800S 2006-2010For BMW F 800 ST 2007-2011For BMW HP2 Enduro 2005-2010For BMW HP2 Megamoto 2006-2010For BMW HP2 Sport 2008-2010ForBMW K 1200R 2005-2008ForBMW K 1200S 2005-2008ForBMW R 1200GS 2004-2013For BMW K 1300R 2009-2014Note:1. We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3. Instruction is not included,professional installation is highly recommended.4. The color of the actual items may slightly different from the listing imagesdue to different computer screen, thanks for your understanding.Package Included:1 X Pair Turn Signal Light

Mix aus hochwertigem Rindnappaleder und Polyamideinsätzen Hipora®-Membrane: 100 % wasserdicht, 100 % winddicht, atmungsaktiv Knöchelpolsterung kälteisolierendes 3M-Thinsulate™ Innenhandverstärkung Klettverschluss an Handgelenk und Stulpe

Specification:-Type:Front Diamond Style Grille Grill-Material: High quality ABS-Color:Glossy Black-Style:Diamond Style look-Placement on Vehicle:Front, Upper-Fitment Type:Direct ReplacementFeatures:-Made Of Excellent Quality ABS.-Perfect fitment with no modification required.-Gives your vehicle a new style and appearance.-Accentuates your vehicles overall look.-A great upgrade for your vehicle.-Provides better airflow to the radiator to help the cooling process better.-Please check the fitment carefully before buying.-No installation instruction included, professional installation is highly recommended!Fitment:-Only For Mercedes V class W447 V250 V260 2015-2018 (models without camera)(Only suitable for low-equipped models without camera)Notice: Not Fit For Benz Vito.Package Included:1 PCS Front Grille Grill(WITHOUT EMBLEM)