TOP 1996 Retro Soccer Jerseys HOME GASCOIGNE 8 Beckham 7 Shearer 9 Scholes 18 Owen 10 Gerrard Lampard Fowler Vintage Classic 1990 AWAY 3RD Football Shirts Kit SIZE S-XXL

With all our new 35mm handlebar line, we saw the flex characteristics being of optimum importance. For all our 35mm handlebars we have matched their flex characteristics to the 31.8mm equivalent. All 35mm bars have the same ride quality that Renthal handlebars have become synonymous with.We have achieved the same ride quality with no loss of strength or durability at a very similar weight.Importantly, we have increased the width of all handlebars by 20mm, taking the Fatbar Lite 35 to 760mm.The Renthal Fatbar Lite 35 is the ultimate lightweight, trail-proof handlebar.This handlebar ticks all the boxes with an ample width, an optimized lightweight taper tube construction and four rise options.Boasting a full 760mm width and the aluminium handlebar market leading weight of just 270g, the Fatbar Lite 35 is suited to a wide range of disciplines, from trail riding, right through to XC and Enduro racing.The Renthal Fatbar Lite 35 is the handlebar of choice for any rider searching for the ultimate in control and durability and the minimum weight.Renthal Fatbar Lite 35 handlebars are designed to ride faster, jump further and last longer

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.

The new comfort flip-up helmet continues the development of its predecessor Nolan N104 Absolutely consistently and impresses with its elegant design, numerous technical features and a huge selection of colors and decors. Its compact dimensions (thanks to two different shell sizes), double P/J homologation, an ultra-wide visor, adjustable in different positions sun visor, airbooster technology for optimal ventilation, the patented elliptical opening mechanism and much more make the Nolan N100.5 for reference in the class of flip-up helmet all-rounders. Shell
Polycarbonate shell 2 outer shell sizes 6 inner shell sizes
Visor
Scratch resistant treatement on both sides Ready for Pinlock Quick release shield system
Vision protection system
Scratch resistant and fog resistant treatements on both sides UV 400 protection
N-Com compatibility
Ready for N-com (B901L R series, B901 R series, B1.4, MSC III R series, ESS) Ready for ESS - Emergency Stop Signal N-com keypad adapters
Ventilation system
Airbooster technology Top ventilation Chin guard air intake Rear air exhaust
Retention system
Microlock²
Comfort padding
Removable and washable Antibacterial treatment Removable clima comfort top Removable cheek pads Removable neck roll
other Features
Wind protector Top helmet bag Protective hard coating on the vanish
Microlock² (patented) Double lever retention system with micrometric adjustment. This system consists of a thermoplastic ergonomic opening lever, and of a second aluminium toothed and holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system.

You want the increased control a dropper post gives you but you had to give up your Thomson post to have it. Not any longer you can put your Thomson post back on the bike! Our cartridge based system is designed to have the longest service life in the industry. If repair is needed it is fast, affordable and simple. Every single component is the best available. Custom made Norglide bearing bushings custom made Trelleborg O-Rings and seals Thomson saddle clamps and fasteners Motul Oil. This is the drop post good enough to be called a Thomson Elite. 450 grams the lightest drop post available.Dropping the saddle in certain terrain allows the rider more confidence being able to raise the saddle back quickly meansyou keep riding without stopping to adjust. Same great clamps, same tested fasteners. Literally millions of miles have been put on the saddle clamping system of our post. While all drop posts will require service the Thomson Dropper Post has the longest field life 2 years guaranteed and the easiest least expensive service procedure. Our replaceable internal cartridge system makes service quick and foolproof. Seals sized to fit perfectly synthetic oil with wide temperature range. Charged with 100% nitrogen. Custom double lipradial spring outer bushing for both smooth operation and maximum resistance to contamination.Side mount of actuation mechanism means we can keep all the critical dimensions of the Thomson Elite cradlebolt and clamp geometry. One piece forged inner stanchion for strength and reliabilty no joint to loosen and fail. Actuation is by cam so rider gets smooth variable speed and height without resorting to a complicated damage prone hydraulic actuator. No bleeding require dever. 5mm of setback is built in to the seatpost cradle allowing a little more cockpit room.Designed not to extend when the saddle is used to hang the bike on a lift chair. Custom made Norglide bearing bushing ensures years of service with no saddle left to right “play.”

Sometimes simplicity is all you need when you grab the handlebars and head out on the bike. Easy to wear, light and extremely comfortable with a supple leather palm, the Road glove provides just that. Freedom to ride with peace of mind.
Main external materials : polyamide and goat leather. The palm is contructed in goat leather and equiped with foam reinforcements. Furygan "Sensitive Science" : the forefingers and thumbs are equipped with a specific insert allowing for the use of touchscreen devices. Double wrist tightening (zip and velcro).

Topeak Alien XSAs the name suggests the ALiEN XS is an extra compact version of the ALiEN multi-tool.A lightweight, compact version of the famous ALiEN tool. 17 tools fold into an engineering-grade plastic body.Tools include:2, 2.5, 3, 4, 5, 6 & 8mm Allen wrenches8, 9 & 10mm box wrenchesPhillips & flat screwdriversSpoke wrenches for 14g & 15gUniversal chain toolStainless steel knifeBottle openerClip bag included.Weight 170g