Faithfull Drum Auger 25ft

These Forgefix Phillips, Single Coarse Thread (SCT) Drywall Screws have a black phosphate finish for increased durability. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. They are supplied collated, with 50 screws per strip and 1,000 screws per box. APPLICATION:Designed for fitting dry lining to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Collated Screw Phillips Bugle Head SCT 3.99 x 35mm Box 1000

The Bosch S922EHM Blades are part of the "Endurance for Stainless Steel" range.  - Carbide Technology & Teeth Ground - For Inox / Stainless Sheets (2-4mm), Inox / Stainless Profiles (up to 100mm diameter) & Glass Reinforced Plastic / Epoxy (up to 100mm) Specification: Total Length : 150mm Tooth Spacing : 1.4mm / 18TPI

The Einhell Power-X-Change Starter Kit, contains the following: 1 x Power-X-Change 18 Volt Charger that features a 6-step charging condition display and is ready for wall-fastening. The charger uses an intelligent charging-management-system for long battery life (battery status will be constantly checked and accordant loaded, deeply discharged battery will be charged in repair mode). Input Power: 240 Volt.Output Voltage: 21 Volt.Charging Time: 1.5Ah: 30 Min, 3.0Ah: 60 Min, 5.2Ah: 130 Min. Weight: 0.5kg. 1 x Power-X-Change 18 Volt 2.0Ah Li-Ion Battery that features a 7-in-1 ABS: Active Battery Management System and a 3-Step LED battery control. The microprocessor controls key parameters like temperature, voltage and even a deeply discharged battery can be charged in repair mode which offers a long working battery life. The high quality Li-Ion battery cells provide nearly no self discharge and the rubber coated housing gives high impact protection and a high grip. It also has a recessed grip that ensures good ergonomic handling. Battery Type: Li-Ion.Voltage Supply: 18 Volt.Battery Capacity: 2,000 mAh.Product Weight: 0.4kg.

Filamento PLA 1.75MM Filamentos de impresión 3D para impresora 3D 1 KG 1 carrete

The Monument OMAT® Soldering Mat is a patented cut out mat for soldering copper pipes from 15-22mm in diameter. It reduces the risk of fire, and its unique shape with overlap gives a tight and secure fit. Unlike conventional soldering mats the OMAT® wraps around the pipe offering complete protection to the surrounding surfaces. The OMAT® is constructed from a woven glass fabric and does not present any of the hazards associated with asbestos materials. Additionally, it is stitched all round and will resist temperatures up to 600°C.The Monument 2361F OMAT® Soldering Mat has the following specifications: Size: 250mm² (10in²).Pipe Capacity: 15-22mm.

Bahco S138 1/4in, 3/8in, and 1/2in drive 138 piece metric and imperial socket set that consists of: 12 x 1/4in Hexagon Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, and 13mm. 10 x 1/4in Hexagon Deep Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12, and 13mm. 1 x 1/4in Reversible Ratchet 60 Teeth and Two Component Handle 150mm. 1 x 1/4in Spinner Handle with Two Component Handle 150mm. 1 x 1/4in Sliding T-bar 106mm, 1 x 1/4in Extension Bar 50mm, 1 x 1/4in Extension Bar 100mm, 1 x 1/4in Universal Joint, 1 x 1/4in Bit Holder, and 1 x 1/4in Flexible Extension Bar 150mm. 16 x 3/8in Hexagon Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, and 22mm. 1 x 3/8in Reversible Ratchet 60 Teeth and Two Component Handle 200mm. 1 x 3/8in Spark Plug Socket 21mm (13/16in), 1 x 3/8in Spark Plug Socket 18mm, 1 x 3/8in Spark Plug Socket 16mm (5/8in), 1 x 3/8in Universal Joint, 1 x 3/8in Extension Bar 75mm, and 1 x 3/8in Extension Bar 150mm. 18 x 1/2in Hexagon Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 32, and 34mm. 9 x 1/2in Hexagon Sockets: 3/8, 7/16, 1/2, 9/16, 11/16, 3/4, 13/16, 7/8, and 1.3/16in. 1 x 1/2in Reversible Ratchet With 60 Teeth and Two Component Handle 250mm, 1 x 1/2in Sliding T-bar With Double Function, 1/2in Head 3/8F-1/2in Male Adaptor, 1 x 1/2in Extension Bar 125mm, 1 x 1/2in Extension Bar 250mm, and 1 x 1/2in Universal joint. 1 x Bits Adaptor: 1/4in Square Drive. 4 x Pozidriv Bits: PZ 0, 1, 2, and 3. 5 x Phillips Bits: PH 0, 1, 2, 3, and 4. 3 x Flat Bits: 4, 5.5, and 7mm. 6 x Insert Bits: 3, 4, 5, 6, 8, and 10mm. 9 x Torx Bits: T 8, 10, 15, 20, 25, 27, 30, 40, and 45. 1 x Bits Ratchet, 3 x Hexagon Keys: 1.5, 2, and 2.5mm. 8 x Crow Foot Wrenches: 10, 11, 13, 14, 15, 17, 18, and19mm 13 x Combination Spanners: 7, 8, 9, 10, 11, 12, 13, 14, 15,16, 17, 18, and 19mm. Supplied in a High Density Polythene Case.