Kostenlos
Unterstützung
These Knipex 35 32 Series precision electronics round nose pliers with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. For very fine installation work in electronics and fine mechanics used for gripping, folding and bending. Smooth ground gripping surfaces with carefully deburred edges. Low friction double spring for gentle smooth closing and opening. Mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. Length: 115mm.Pointed Round Jaws for bending wire eyes.
The Hitachi DN18DSL/L4 Angle Drill 18 Volt with a lightweight, compact design and a 10mm keyless single sleeve chuck. It is the class leader, with a low centre height of 23mm, for easier working in confined spaces. The variable speed paddle and battery life indicator mean more effective work time and less down time. The drill is fitted with a soft grip for improved comfort and control. There is also a handy white LED work light and a belt clip, which can be fitted on the left or right hand side. It has an all new design and is compatible with the full range of 18 Volt slide tools, accepts all Hitachi 18V Li-Ion slide batteries from 1.5Ah to 5.0Ah ( please note this machine is supplied BARE, WITHOUT a battery). Bare Unit, No Battery or Charger Supplied. Specification No Load Speed: 0-1,800/min.Max Torque: 12Nm.Capacity: Wood: 28mm, Steel: 10mm.Centre Height: 23mm.Head Height: 88mm.Overall Length: 326mm.Weight: 1.7kg.
The ALM Manufacturing WX168 Spool & Line 2mm x 6m is suitable for: Worx: WG168 & WG168E. Compares to: WA0014. Line Diameter: 2mm.Line Length: 6m. Manufactured in the UK.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
The Monument 781T DIY telescopic adjustable basin wrench is designed for use when tightening or loosening nuts in awkward positions, particularly those underneath basins or baths. The teeth on the jaws will grip uneven shapes as well as pipes, hexagons, squares etc. The swivelling head allows access where fixed spanners will not operate. Extends from 25 - 43cm
The Plantpak by Crest Half Seed And Cutting Trays are premium quality trays which are used by professional growers. Each tray comes with 20 x 6cm pots, which are the perfect size for starting seeds and cuttings. The tray allows capillary action watering and also allows easy transportation. Made from 100% recycled and recyclable material. Dimensions: 24.5 x 30 x 5.5cm.Supplied in packs of 36.