Stahlwille Extra Deep Bi Hexagon Socket 932 Inch

E-Magnets Shallow pot magnets are low profile for applications where height is limited. They have a clearance hole through and a countersink on the magnetic face to accept a countersunk screw. Maximum operating temperature: 500°C.Material: AlnicoThe E-Magnets 827 Shallow Pot Magnet has the following specifications: Diameter: 29mm (1.1/8 inch). Height: 9mm (11/32 inch). Maximum Pull: 5kg (11 lb).

The Britool 12-point 1/2 inch sockets are crafted in chrome vanadium steel and finished in high chrome. The OGV® profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only. ASME B 107-1, ISO 1174-1.The Britool BRIE113702B Socket 12 Point Standard 1/2 inch Drive 7/16 inch has the following dimensions:Size: 7/16 AFLength: 38mmWeight: 45g

Denso Flashing Tape Primer is a brush applied solvent-based primer, used for priming surfaces prior to the application of Denso Flashing Tape. Composition: Solution of oxidised bitumen in aromatic hydrocarbon solvent.Cleaning solvent: White spirit. Specifications:Drying time: 20 - 30 minutes. Covering capacity: 7 - 8m² per litre. Application temperature: 0°C to 55°C. Solids content: 58% of weight. Volume: 1 litre.

The Abus Expandable Window Grille range offers protection against basement and ground floor window break-ins. A single window as small as 500 x 300mm can be protected, multiple units can be installed to cover a range of window sizes. They provide a quick, easy secure solution especially post burglary attempts or breaks ins, providing peace of mind and security. The grilles have a thick passivated coating that is highly resistant to corrosion and can be painted if desired. They are easy to install and come with all the required security screws and fixings. 1 x ABUS Expandable Window Grille 700-1050 x 600mm

The Faithfull Centre Square (Finder) is made from ground tool steel and has a hardened and tempered blade. The device has a useful square for rapid location of round bar or disc centre. To execute, place the round bar between the centre square. Scribe different lines on the workpiece each time changing its position. The centre of the scribed lines will provide the accurate centre of the workpiece. The Centre Square (Finder) is supplied in a box.Bar Capacity: 75mm.

Teng Tools impact sockets are specifically designed for use with power tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality.The sockets have a 1/2 inch drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.The TEN920519 Impact Socket has the following specifications:Length: 38mm.Size: 19mm.