Held Air n Dry Damen Tourenhandschuhe Schwarz M

Specification:MaterialABSLifespan5000000 HoursColor Temperature6000KTrailer Lights Voltage12VPlate Light Voltage10-30VLine Connection:Red-BrakingGreen-DrivingBlack-Ground lineYellow-Turning Left/RightFeatures:1. Featuring trailer lamp with 12 LEDS each light.2. Waterproof, dustproof, anti-shockanti-vibration.3. Easy Install to different types vehicles such as truck,trailer.4. High light efficiency, low power consumption, energy saving.5. Yellow = Indicator. 12 L.E.D each light (6 indicator, 6 stop/tail).6. Blacklittm optics produce a high quality visual appearance in both illuminated and non-illuminated states.Note:1. Manual measuring, please allow 1 ~ 3mm error,thank you.2. Due to the difference between different monitors, the picture may not reflect the actual color of the item.We guarantee the style is the same as shown in the picture.Package Included:1 X Plate Light2 X Trailer Lights

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Outer garment
Fibretech 600D : soft & resistant
Membrane
Waterproof & breathable membrane
Isolation
Full removable thermal lining 120g Fixed lining laminated to the membrane
Protection
Adjustable approved elbow protectors Approved shoulder protectors Pocket for approved back protector
Comfort
Body fit Front & back ADS ventilation system Comfort neprene collar Adjustable waist Zip cuff fastening Reflective material Strap for conneting with trousers

Description:Highly sensitive,use immediately after matching.This project is not a remote control, it is just a remote key chip replacement.The chip will need programming by a group dealer or by the locksmith.Chip can be programmed only ONCE.Specification:-Color: Black-Material: Ceramic-Size: 12x5x3mm-Type: 4D69 ID69 80 Bits-Fit For Yamaha and other Motorcycles.Package Included:1 X Transponder Chip

This is Grex’s mini-jet for children, designed for those looking for a helmet for their little ones with the Made in Nolan guarantee. Based on the solid Nolan N20 model, it is characterised in particular by a compact size and for the inner comfort padding which has been carefully designed for the particular conformation of children’s heads. Microlock retention system with micrometric adjustment. Also to notice is the versatility of this helmet, with the availability of two visors: one long visor in light blue, which protects the face from water and wind while still guaranteeing suitable air circulation inside the helmet, and a Smoke-coloured goggle-shaped visor (for daytime use only), created for the hotter and sunnier seasons.

Specification:Product Name: Hydraulic Rear Disc Brake CaliperColor: Gold and BlackMaterial: MetalHydraulic Cable Length: Approx 48cmDistance Between Master Cylinder Mount Holes (centre hole to centre hole): 40mm50mmNote:1. We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3.Instruction is not included, professional installation is highly recommended.4. The compatibility is just for reference. Please compare the part No.with your original one before purchasingPackage Included:1 X Hydraulic Rear Disc Brake Caliper