Richa Sturgis, leather jacket

Description:1.Black Matte Finish.2.Installation instructions not included.3.Correct Connector No cutting or splicing.4.Strict quality control standards to Build and test.5.Professional Installation is Highly Recommended.6.Cutting of the hood will be required for installation.7.Help remove unwanted heat from under your hood.8.Universal Hood Louvers Panels can give you a customized appearance on the outside.9.Locate the heat-venting louvers in the most crucial areas of your hood to allow the largest amount of heat to be removed from your engine bay.Feature:Material: ABS PlasticColor: Matte Black FinishInterchange Part Number: Hood-Vent-Louver-Air-FlowOther Part Number: Add-On-Body-KitPlacement on Vehicle: Left, Right, Front, RearDimension: 16.7 x 4.5Fitment:Fits Universal Fit for all vehiclesPackage Included:1 X Pair Of Hood Vents

Description:Gear shifting motorcycle riding shoe protector.Made of TPU, both durable and comfortable to wear.The shoe protector will protect your footwear from scuff marks or wear and tear caused by your motorcycle shifter.Using TPU soft rubber, wear-resistant, non slip can be adjusted according to the actual needs;Moderate thickness, comfort to wear, good anti-slip effect;Assist the shift operation without damaging the shoes, achieving a very good protection.Simple design, practical, compact, easy to carry.It is easy to wear and to care for.An versatile product, allowing you to switchyour footwear for different types of riding and still stay protected.Specification:Product Name: Moto Shoes Protector PadMaterial: TPU Soft Rubber, Antiskid BeltLength: 31cmColor: BlackSize: One size fits allNote:1. We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)Package Included:1 X Motorcycle Gear Shift Pad

Hose aus 500D AIRDURA und 630D DYNAXPRODUKTMERKMALEAustrennbare solto-TEX® 3-Lagen Membrane (X66002) Polyester-Netzfutter mit Wassersperre Grosse Ventilationsöffnungen am Oberschenkel Taillenversteller mit Gurt Antirutsch-Besatz am Gesäss Wadenweite individuell einstellbar Komfort-Stretcheinsätze an den Kniekehlen 4 Aussentaschen Reflektierende Transferdrucke Höhenverstellbare Knieprotektoren SAFETECH 520, Bauart geprüft nach EN 1621-1:2012, Level 2 Tasche für Hüftprotektor (Hüftprotektor HIP (X99522-HIP-10), Bauart geprüft nach EN 1621-1:2012, optional nachrüstbar) OPTIONALSeparat tragbare Innenhose: Softshellhose Funktion (X69001) GRÖSSENHerren M - 3XL Herren lang LM - LXL Herren kurz KM - K2XL MATERIALObermaterial: 100% Polyamid Futter: 100% Polyester Membranträger: 100% Polyester solto-TEX® Membrane 100% Polyurethan laminiert

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

2X 13 LED Universal Motorcycle Motorbike Turn Signal Indicators Light Lamp AmberDescriptionMaterial: PlasticCase Color: BlackLens Color: AmberLED Color: AmberQuantity: 2 pcsLEDs per Light: 13 LEDsVolt: 12V DCUsage: Turn Signal /Indicators LightsCompatibility: UniversalDimension:Like the picture showConnection: 2 wiresWire length: 24cmFitment:Universal fit all the motorcyclePackage includes:2 x Motorcycle Turn Signal Lights

The 100% made in Italy Cross Shorts Zandona ESATECH PRO have been studied to defend from collisions and bruises the sacral zone, the sides and hip-femur zone. This short has transpiring soft shields with differentiated thickness and semi-rigid shields made by special polyurethane alloy. These products are composed by a precious honeycomb-net tissue that is transpiring, anti-bacteria and antistress. Its great comfort comes from the perfect following of the body shape and movements thanks to its flexible paddings and plastics.
100% made in Italy transpiring soft shields with differentiated thickness and semi-rigid shields made by special polyurethane honeycomb-net tissue that is transpiring, anti-bacteria and antistress flexible paddings and plastics