Klim Viper Venom, goggle

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Features
100% waterproof and breathable insert Adjustment on sleeves Short back zip Short back loops Wallet pocket Ventilation system Inside pocket Height-adjustable elbow protectors Body Fit Shoulders and elbows protectors Reflective material

Car Audio AMI AUX To USB Cable Data Charging Adapter for AUDI A3 A4 A5 A6L Q5 VWTiguanFeatures:1. Plug and play.2. Light weight, portable.3. Ideal for connecting your USB device to your AMI/MMI system.4. Support playing the music files in the USB disk and other device.Specification:Connector AMDI MMI AMI portConnector BUSB FemaleCable Length37cm/14.5inchPart Number4F0051510E / 4F0051510LFitment:for Audi A6L/Q5/A8/S5/A5/A4L/A3forVW Tiguan/GTI/CC/MagotanAnd more other vehicle models with AMI MMI port..Package Included:1 X AMI to USB Female AUX Cable for VW/AUDI

Features Optimal fit and comfort The X.G200 is available in 2 shell sizes for optimal comfort and fit. Visor position 2 different setting positions for the helmet shield off-road capability With a super-strong and lightweight shell, with carbon fiber reinforcement in the chin area. ventilation The huge amount of ventilation slots in the chin guard and the 2 ventilation slots below the helmet shield ensure that the inside of the helmet remains fresh and comfortable. The soft, luxurious lining The masterfully designed interior is stylish and simple at the same time and represents the pinnacle of X.G10 comfort. The X-Mart Dry technology provides a soft feel and a sophisticated cooling system with a drying rate that is twice as fast as normal cotton and one provides additional insulation on cold days. All interior parts are completely removable and washable, antiperspirant and anti-allergic. Double D-ring The entire X.Garage collection comes with the simple and reliable double D-ring locking system.

Specifications:Name: Universal Car Seat Mat Cover PU Leather Breathable Cushion PadModel: E63116Type: Single Front Seat CoverOptional Color: Black/ BlackRed/Coffee/Green/Beige/BlueMaterial: PU LeatherQTY: 1 PCFeatures:- Made of PU leather material, comfortable and smooth.- Natural environmental PU leather gives delicate feeling.- Suitable for year round use and for all cars.- Protect the car seats, and keep the car the same.Note:Due to the light and screen setting difference, the item's color may be slightly different from the pictures.  Packaging Included:1 X Front Seat Cover

Weight:
1590 ± 50 gr.
Material:
Technopolymer
Inner lining:
Removable inner lining Removable cheek pads Antiallergic fabric
Buckle:
Micrometric system
Homologation:
Double Homologation P/J
Visor:
Anti scratch clear visor Small smoked sun visor Pinlock ready (Pinlock lens not included)
Ventilation:
Frontal air ventilation, 2 x upper and 2 x chin guard 2 x rear extractors
Other:
Removable Chin guard Caps for jet version