?Fleurs de montagne Reconnaître près de 200 espèces de plantes de montagne. Une identification simple et sûre grâce aux photos et à une description précise. Pour chaque espèce : deux photos, une carte de répartition, une description détaillée,...
2 x Übernachtung im komfortablen Doppelzimmer, 2 x Teilnahme an unserem reichhaltigen Frühstücksbüffet, 1 x Tasse Glühwein zur Begrüßung, 1 x Weihnachtsteller auf Ihrem Zimmer pro Zimmer, 1 x Abendessen in Form eines festlichen 3-Gang-Menüs oder Büffets (nach Wahl des Küchenchefs), kostenfreie Nutzung des Sauna- und Fitnessbereiches, kostenfreies Parken während Ihres Aufenthaltes, kostenfreies W-LAN
These Forgefix Round Head Nails are multi-purpose nails, for use with both soft and hard timber materials. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:These nails are the most popular type of nail, used in many joinery and construction applications.Round Head Nail Bright Finish Finish 25mm Bag of 2.5kg
7 Erholungstage, 6x Übernachtung in der Suite, 6x Frühstück vom reichhaltigen Buffet, 1 x 3-Gänge-Candle-Light-Dinner bei griechischer Gastlichkeit, 1 x Eintrittskarten für ein Leipziger Kabarett, 1 x hoteleigenes Tandem an 2 Tagen (Verfügbarkeit nur auf Anfrage), 1x Flasche Sekt zur Begrüßung, 1x süße Naschereien, vielfältiges Karten- und Informationsmaterial, kostenfreie Parkplätze direkt am Hotel
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
