These Faithfull professional, high quality Combination Spanners are forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Manufactured to DIN 3113 standards. The broached jaws and rings ensure a consistent tolerance and a guaranteed accurate fit. Both the jaw and ring end are set at a 15 degree offset for ease of use in awkward positions.Size 36mm
Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 5 years. Specification: Colour : Red Finish : Smooth Size : 400ml Coverage : 0.5m²/L
The Master Lock Excell™ Titanium Reinforced Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel. This stainless steel padlock with titanium reinforced body is a durable and solid padlock with the added security of a shrouded shackle that makes it very tough against pry/pull attacks. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: gates, sheds, storage units, fences, containers and chains. Specification Shackle Diameter: 8mm.Internal Shackle Diameter: 22 x 24mm.Cylinder: 4-pin tumbler.
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.
