Kostenlos
Unterstützung
Specifications:Product: Baby in Car DecalSize: 9.8X7cmThickness: 1mmColor: Yellow, Blue, RedWeight: 6gPackage Included:1 X Car Sticker
The Daytona SPRINT is a touring boot made of special full cowhide. Low-priced boot with high shaft.
Advantages:
soft outer calf leather foot leather lining textile lining (80% polyamide/20% polyester) side zip with splash-proof leather covering velcro fastener for different calf sizes reinforced gear change cushion from abrasion resistant PU foam anatomically formed climatic insole
Safety:
shinbone protection with inner padding robust ankle and shinbone reinforcement on both sides, with latex foam padding a plastic reinforced inner sole with a hot-dip galvanised steel inlay, that allows you to gently roll your feet 3M-Scotchlite re?ectors special robust and non-slip rubber sole Height of shaft: ca 29 cm Sizes: 34 - 49
The Arc H2O Ladies proves to be a perfect jacket for women who like to wear a sporty style on every occasion, in cold and warm weather, in rain and sunshine. Their style is influenced by the racing combinations of our MotoGP professionals, so it s as fantastic on the road as on the track. Thanks to the hydratex® | G-liner membrane, the outer shell is waterproof and breathable, and depending on the outside temperatures, the thermal lining comes in or out. SEESMART Level 1 protectors can be found on the shoulders and elbows, the back can be secured with the optional SEESOFT Level 2 back protector. Outer garment
polyester 600D high density softshell 3L
Isolation
removable thermal lining
Lining
hydratex® | Network G-Liner
Features
SEESMART Level 1 protectors prepared for the SEESOFT Level 2 back protector type RV sport fit normal shape laminated reflectors adjustable strap adjustable closures belt loop stretch panels short connection zipper slide-bags inside pockets
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Feature:1. The FM Transmitter has a battery voltage detection function.2. Support bluetooth hands-free calls, built-in microphone, safe answer the phone.3. support for mobile A2DP function, even after playing bluetooth high quality mobile phone music.4. Power automatically back to the boot, automatically enter the pairing state.5. Support U disk expansion play MP3 / WMA format music.6. Comes with USB charger, output 2.1A, can charge for mobile terminal equipment.7. HD display, you can clearly show the FM frequency, song name, player status, connection status.8. Two charging ports, the output 12-24V, supplying power for your electronic equipments.Specification:Model: ER9Color: BlackRated working voltage: 12V-24VLimit working voltage: 9V~26VDual USB Output: 5V/2.1AWorking Current: 45mA(Max.)Consumption rate: 1WOperating temperature: 0 ~ 50 degreesSupport playback format: MP3/WMASignal to noise ratio: 60dBDistortion: 0.1%Frequency response: 20Hz-15KhzLeft and right channel separation: 60dBbluetooth version: 4.2bluetooth transmission distance: 10MMicrophone effective distance: 0.5-2MWorking Temperature: -10℃-70℃FM transmitter frequency: 87.5MHZ --- 108.00MHZSensitity: -92dBmSize: 95*73*50mmWeight: 86gPackage Included:1 X Wireless bluetooth Car FM Transmitter1 X Mini bluetooth Earphone1 X User Manual