ONeal Slat Crimson, Trial helmet

Description:12-24V Car Charger Socket QC3.0 Dual USB Port Volt Display Phone Fast Charging.Specification:Material: Aluminum alloyColor: Blue/Red/Silvery/Black/Yellowlight color: Red LightInput voltage: DC12V-24VNormal output: 5V/2.4VFast Charging Output: 5V/3.4A; 9V/2.5A; 12V/2AMaximum power: 30WNo-load power: 0.18WWorking temperature: the lowest is - 20℃ and the highest is 80℃USB number: One is the ordinary 2.4A USB One is the QC 3.0 fast chargeScope of application: It can be installed on automobiles, motorcycles, beach cars, RV, SUV, boats, yachts, and other walking toolsUsage: It can be used to supply power for mobile phones, tablets, navigation and GPS etcFeatures:Dual USB Port.Charging is convenient and fastCan be installed on carsAluminium alloy material, heat and corrosion resistant, and resistant to flame retardant, very high safety factorDigital voltmeter, real-time monitoring of voltage statusThere are a variety of protection functions: input over-voltage, under-voltage protection;output over-current, over-voltage, under-voltage, short-circuit protection; reverse connection protection;chip internal high temperature protection.Note:1.We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2.Please allow 0.5-1 inch difference due to manual measurement. (1inch=2.54cm)Package Included:1 X QC3.0 Socket

Helmet Technology
Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, quick release screw on face shield that is optically correct, compound-curved, scratch-resistant and protects against UV-rays Ventilation: 10 points of aerodynamically designed flush fit ventilation with chin, top, rear, and unique side extraction vents. 5 intake vents and 5 exhaust vents Inner sun shield: Smoke tinted inner flip down sun shield system with left side slide lever Visor: A removable and adjustable (40mm) screw-on visor 7 in 1: Helmet can be configured one of seven different ways. Ships with all parts included This helmet model meets or exceeds both ECE 22.05 and DOT FMVSS-218 motorcycle helmet safety standards Retention system is microlock (quick release) A clear coat finish to protect paint & graphics A large-size FX-55 weighs 1.68 kg or 3.69 lbs
Removable, washable and custom sizable Interior AFX helmet liners and cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable and washable. The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness and cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner and cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block.

Helmet Shell & EPS Size XS-M L-XXL



XS S M L XL XXL

Check Pad Thickness (mm) 40 36 32 28 24 20

Comfort Liner Thickness (mm) 12 10 8 10 8 6

Specifications:Product: Car Headrest PillowsMaterial: Leather+Ice Silk+Soft CuttonColor: BlackSize(L x W): Approx. 27x18cmQuantity: 2PCSGross Weight: Around 330gFitment: Universal fit for four seasons and all vehiclesFeatures:1. Fine workmanship, excellent practicality and durability.2. Neck pillow can effectively prevent the floating car and neck caused by a long bend, fatigue, pain,make your drivinglife more comfortable, safer, more healthy.3. Carefully prepared cotton soft pillow, breathable, comfortable, antibacterial, anti-mite.4. Provide a full range of comfort support for the head and effectively release cervical spine pressure.Package Included:2 x PillowsNotice:1. Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.2. Please understand that colors may exist chromatic aberration as the different placement of pictures.

Men's Fall Winter Fashion Mature Stand Collar Retro Woolen Jacket

Features
Classic collar with neoprene high neck roll press stud tightening on biceps cuffs with tension strap Floor lift with buckle elbow Sides and shoulders reinforced with extra resistant fabric Reinforced and foamed lumbar zone 2 outside pockets 3 inside pockets 1 waterproof wallet Connection with the trousers by zipper Buckle on the back
Material
Removable inner lining warm and waterproof breathable Drymesh 5/5 membrane to which the membrane connects.
Safety
Model Elbow Shoulder Protectors Level 2 Bag for back protector Reflective stripes on the reverse side

Deep inside a desert burial mound you find him, the all-powerful god of mountain and earth. It is in front of him that you will answer the riddle of steel and the calculus of cool. For he is Krom, and you will not be cast out of Valhalla. Not you, not today. Features
Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country. Includes internal DropShield™ and Clear quick-change fog-free FliteShield™. Removable HydraDry™ moisture wicking liner. Injection molded Polycarbonate shell for strength.
Fit The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back and a little wider side-to-side. Venting 4 intake vents, including a MX inspired chinbar vent, and 2 exhaust ports are coupled with deep channeling in the interior energy absorbing EPS foam resulting in superior helmet venting. Weight Average - A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style. Exterior The helmet’s ventilation system consists of strategically placed air vents, intakes, air channels and exhaust ports. The oversized chinbar intake enhances airflow, keeping you cool by routing air where you need it most. A decrease of both drag and weight was achieved by sculpting the traditional neckline of the Airflite to avoid jacket or suit interference. Shield The Airflite has not one, but two shields. The unique quick-change fog-free shield keeps debris away from your money maker, while the internal interchangeable drop shield has the sun in check. No more swapping shields for cloudy or sunny days. Just reach up, flip the switch, and ride forever. Interior The removable sweat wicking Hydradry™ liner provides a snug and contoured fit. Air from the vents is channeled between the comfort liner and the protective,energy absorbing EPS foam liner to create a nearly perfect rider-focused interior. The airflow works in conjunction with the Hydradry™ liner to effectively reduce heat build up. Combine that with superior venting and a removable breath deflector which creates a nearly perfect rider-focused enclosure. ICON FliteShield™ Compatible with the Airflite™ helmet. Featuring a 3D molded process for optical clarity, and a fog-free coating. Icon DropShield™ Instead of carrying an extra FliteShield™ for changing light conditions, with the flip of a switch, engage the tinted DropShield™ hidden within the helmet.