The Bosch S1543HM Blades are part of the "Endurance for Brick" range. - Carbide Technology - For Small Bricks (up to a material thickness of 150mm) Specification: Total Length : 240mm Tooth Spacing : 12.7mm / 2TPI
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.
E-Magnets Shallow pot magnets are low profile for applications where height is limited. They have a clearance hole through and a countersink on the magnetic face to accept a countersunk screw. Maximum operating temperature: 500°C.Material: AlnicoThe E-Magnets 827 Shallow Pot Magnet has the following specifications: Diameter: 29mm (1.1/8 inch). Height: 9mm (11/32 inch). Maximum Pull: 5kg (11 lb).
Rustins Quick Dry Radiator Enamel is ideal for touching up white appliances. The enamel is specially designed so that it stays white and does not yellow with age. The enamel is touch dry in 30 minutes, Heat resistant, and low odour.Not to be used on oil filled electric radiators. Avalible in gloss or satin finish.Rustins Quick Dry Radiator Enamel Satin White. Size: 250ml.