Abus 92/65 Monoblock Shutter Padlock Carded

Wood chisel with steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel reassurance of strength and durability and the pre-sharpened blade is ready for immediate use.Size 6mm (1/4 in)

The Arrow RL100 riveter is made of an all steel construction with comfortable vinyl grip. The spring-loaded handle allows for easy rivet loading and ejection, with the changeable nose piece taking a 1/8 diameter rivet in one hole, and 5/32 and 3/16 diameter in the other hole. To change hole size simply loosen screw on nose piece plate, swing pivot plate around then re-tighten screw.Riveter only without any rivets supplied

The Makita HP2071F Percussion Drill is fitted with a high power motor but packed into a slender and compact body with durable metal gear housing (with a keyless chuck). The new reversing system allows extended service life of carbon brush and no power reduction even in reverse rotation. It is fitted with a torque limiter, the drill stops when the bit hits against reinforcements. It is supplied with a side handle, depth stop and a carry case. Specification: Input Power: 1,010W No Load Speed: 0-1,200/0-2,900/min Impact Rate: 0-24,000/0-58,000/bpm Capacity: Steel 18mm, Masonry 20mm, Wood 40mm Weight: 2.4kg Vibration Hammer Drilling : 16 m/sec² Vibration K Factor : 1.5 m/sec² Noise Sound Pressure : 99 dB(A) Noise Sound Power : 110 dB(A) Noise K Factor : 3 dB(A)

The Makita KP0810CK 850 watt Heavy-Duty Planer has the following features ;- Constant speed under load.- Double insulated.Technical specifications :Planing Depth Max per pass: 4 mm.Planing Width: 82 mm.Rebate Depth : 23 mm.No load speed: 16,000 rpm.Vibration plaining softwood: 3.5 m/sec².Vibration K factor: 1.5 m/sec².Input wattage: 1,050 watt.Noise sound power: 99 dB(A).Noise sound pressure: 88 dB(A).Noise K factor: 3 dB(A).Net weight: 3.4 kg.Supplied with ;9mm Socket wrench.Guide rule.Blade gauge.Carry case.

Faithfull Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Each set contains twenty seven punches with the characters & and A to Z.Set supplied in plastic box.Size : 8mm (5/16 in).

The Moore & Wright MW496-01 Magnetic Snake Stand has a corrosion resistant chrome plated flex arm that will hold rigidly in almost any position. The v shaped base is perfect for mounting on rounded surfaces. There is a powerful magnetic base that can be turned on and off depending on the user requirements and the magnetic force is equal to 40kg/85lbs.