Hammerite Stonechip Shield protects surfaces from Stone Chip Damage, Salt, Damp & Rust. It is tough and durable and remains flexible after application. It will not crack or peel. It is easy to apply, with a non-drip formulation, and is overpaintable with most top coats. It is ideal for sills, spoilers and lower body panels of vehicles. Specification: Colour : White Size : 600ml Aerosol
This Scan Saftey sign consists of 2 identical signs, measuring 300 x 100mm each. They are made from 1mm thick, durable PVC. Aggressive waster-based adhesive enables the signs be easily stick on to and remain on any wall. They are printed using UV resistant inks, which resist fading. They are easy to read with clear instruction and illustration. Complies with BS5499 design criteria and helps limit company liability, should an accident occur. The SCA0404 safety sign has the following specifications:Size: 2 signs, measuring 300 x 100mm eachMessage: 'Now wash your hands'.
Few things are more dispiriting than turning the ignition key and hearing nothing. Just when you need your car to start, it plays dead. Worse still, it's probably your fault. Look at the lights switch - did you leave them on? Modern car batteries are very reliable, but leaving the lights on for a few hours will soon discharge them. Even a boot light or an interior light left on overnight can flatten a battery. And a car left standing for a month or so may discharge its battery just from the current drawn by the alarm.To start a car with a flat battery you need the S Style SSJL200, a set of good quality heavy-duty cables with beefy clamps at each end, and a friend is also a good help! Your friend must have a car with a battery in good condition, this will aid in the success on starting your flat battery. Simply position another car near yours so that the batteries are close, but do not let the vehicles touch. Connect one end of the SSJL200 red jump lead to the positive (+) terminal of the boosting battery (Do not let the other end of the red lead touch any vehicle metal components) and connect the other end of the red lead to the positive (+) terminal of the flat battery. Then connect one end of the SSJL200 black jump lead to the negative (-) terminal of the boosting battery and connect the other end of the black lead to a bolt or metal bracket, well away from the battery, on the engine block of the vehicle to be started is a good source. Ensure that the S Style SSJL200 jump leads cannot come into contact with any moving parts of either engine. Start the engine of the boosting vehicle and run it at a fast idle speed for a few minuets. Now turn the ignition to start the engine of your vehicle, the S Style SSJL200 will pull power from the boosting battery to help your battery back to life. Check that your vehicle is running properly then carefully disconnect the SSJL200 and your on your way. 200 Amp.2.5m length.Jump lead with 10mm insulation.Supplied in poly bag with euro slot.
