Kostenlos
Unterstützung
This Inspection Camera aids with documentation, coming with photo and video capturing on the Micro SD card, whilst the 89mm (3.5inin) screen and 3x zoom capability improve visibility.With magnet and hook accessories supplied to help in retrieval tasks, this DeWalt DCT410 is great for multiple applications such as; maintenance (seeing or behind tight spaces), plumbing (viewing clogged pipes/toilets), remodeling (viewing into walls before demolition) and HVAC (looking into the duct for leaks, etc).This DeWalt DCT410D1 comes complete with a 900mm camera cable, charger, hook and a 2.0Ah Li-Ion battery.
The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the centre of the roller and the working ends of the legs.The Moore & Wright 504 Spring Divider has the following specifications: Size: 100mm (4in).
Abrazadera para marco de carpintería Correa para sujetar imagen Correa Abrazadera Ángulo Correa Abrazadera Mitre Mitre Tornillo Herramienta
Mango Hexagonal de acero inoxidable Desbarbado Herramienta de achaflanado externo Máquina de biselado Quitar rebabas Reparaciones Herramientas
Shipping Weight:0.306; Net Weight:0.000; Listing Date:09/16/2020; Special selected products:COD
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.