Kostenlos
Unterstützung
Hauptmerkmale Funktionen Materialien Polypropylene Format A4 Gewicht & Abmessungen Breite 31,3 cm Höhe 22 cm Gewicht 20 g
Acrylic Polymer blended with ultra fine white Dolomite for enhanced surface finish.For interior and exterior use.For use in repairing plaster, stone, concrete or wood.Long lasting repair.Extremely smooth finish.Ronseal applicator included.Very good adhesion. Easy to sand.Ready to decorate in 1 hour.Fills holes up to 5mm deep.
Hauptmerkmale Technische Details Standardmedienformate A3 Gewicht u. Abmessungen Abmessungen B x T x H 499 x 380 x 127 mm Farbe Produktfarbe Grau
Liberon Sanding Sealer quickly prepares the surface prior of bare wood and MDF prior to wax finishing decorative items. It will seal the surface so that less wax is needed and its special lubricants will ease sanding. For table tops, shelves and other surfaces that need a hard wearing finish, seal with Liberon Finishing Oil instead of Sanding Sealer and then finish with wax if required. On floors use Liberon Floor Sealer and then Floor Wax. Purpose:Liberon Spirit Sanding Sealer quickly prepares the surface of bare wood and MDF used for furniture and decorative items prior to wax finishing. It seals the surface so that less wax is needed and its special lubricants ease sanding. Performance:- Ideal for sealing wood before waxing - Suitable for use on all types of new or stripped furniture; including MDF - Brush or cloth applied - Ideal for use on turned woodwork Preparation:Ensure surfaces are bare, dry and free from dust. If you want to colour the wood apply Liberon Palette Wood Dye before the sealer. Application:Shake well before use. Brush on a thin coat of sealer, allow to dry for at least one hour and sand very thoroughly with 240 or 320 grit abrasive paper. Apply a second coat if required and resand after a minimum of one hour. Apply Liberon Black Bison Paste Wax using Ultra Fine (0000) Steel Wool.The Liberon LIBSS1L Sanding Sealer comes in the following: Pack Size: 1 Litre
Reinforced connecting hose to fit grease guns with a 1/8in BSPT thread. Grease hoses allow access to nipples with a limited reach. Due to their flexible construction, these are used for greasing hard to reach places. Fitting are zinc plated and hydraulically crimped on to the hose giving a working pressure of up to 5,800psi - 400bar. Fits Faithfull grease guns FAI GGHD and FAI GGMP, and other greese guns with a 1/8in BSPT thread and working pressure not exceeding 5,800psi - 400bar.Size: 300mm (12in)
