Shift Strike S15, gloves

Features
Outer shells: 3 Airfit Concept Pinlock® Maxvision New Ellip-Tec® Faceshield System Kwikwick2® liner TCT® Thermodynamical Composite Technology Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet. Breath-deflector: Enhanced fog-free performance. Chin-cover: contributes to noise reduction. Closing chinstrap by double D ring. ECE 22-0 This helmet comes standard with a clear visor.
Airfit Concept Airfit™ permits a rider to personalize helmet fit through air adjustable cheek pads with additional noise reduction.Only by SCORPION EXO! Pinlock® Maxvision Fitting perfectly into the specially depressed area of the faceshield, the Pinlock® creates continuous air pressure through the compression force, which in turn stops condensation – and thus fogging – from occurring even when the temperature difference between the outside and the inside of the helmet increases. Kwikwick2® LINER:Very effective, hypoallergenic, removable, machine washable, and very soft and pleasant to the touch, the KwikWick2® lining of the new ScorpionExo® 2011 range is a real custom-made slipper for your head. New Ellip-Tec® Faceshield System Launched on the new Scorpion Racing Exo-2000 Air, the ELLIP-TEC® faceshield mechanism further improves the ease and speed of faceshield changes so unique to Scorpion. This operation can be done tool-less within 10 seconds, with the shield open. Wind tunnel designed to minimize wind noise at high speed, fitted with even more powerful springs to ensure optimum fit of the shield against the seal through the compression force, fully sealed and quieter, ELLIP TEC is also stronger to keep the shield in place in the event of a fall. TCT® Thermodynamical Composite Technology Extremely light, having reduced the weight of the new Exo-1000 Air by nearly 250 g, the new TCT® structure provides a level of protection as yet unseen in the world of helmets. This smart shell is able to gradually crumple on impact, which allows it to absorb most of the energy generated by the shock, while retaining one of the strongest structures.

Features
Waterproof and breathable thanks to the soltoTEX® membrane Textile lining Comfort foot bed 2 zippers to make it easier to put on the boots Reinforced heel cap Stretch insert on the calf Inner boot with neoprene on the top for more comfort Reflective insert on the heel Plastic inlays on ankle and shin section Abrasion-proof rubber sole Gear lever protection made of rubber Safety: in accordance with the standard EN13634:2015

Twist is an MX helmet made in Airoh’s high resistant thermoplastics (HRT) and expressly designed for the most demanding riders. Its outer shell has an ultra light weight and an aggressive look and is a perfect choice for the most demanding riders to excel in the toughest races. Its lining is highly breathable, removable and washable and provides absolute comfort. Twist also has an adjustable peak and a dust filter (as an added plus for off-road rides). A double D-ring retention system ensures maximum comfort and protection even in the most risky situations. Features
Thermoplastic HRT 1180gr +- 50gr 1 shell size Front vent Chin guard vent Rear vent Removable and washable inner lining (Hypoallergenic) Doppel D-Ring Adjustable peak

Tricarboco The outer shell is made of TRICARBOCO fiber, a mixture of Kevlar, carbon and fiberglass with different weights/breaking loads linked up. Loads, linked up with aramid resins that ensure a lighter, harder ,more safety and impact resistant shell. D-Ring Micrometric retention system with rapid release: simple and strong. Visor
Internal visor that can be operated from the outside and functions as sunglasses Visor is treated with the most performing anti-fog processes to guarantee the best performance even in the most critical conditions The visor is three-dimensional, optically accurate, printed in optic PC, treated with scratch-proof and UV blocking material Visor is treated with the most performing anti-scratch processes which effectively protect the surface
removable and washable Cheek pads and internal shell are completely removable and washable. They are made with prestigious sweat-absorbing materials largely customizables. Peak Removable peak designed to have an optimal aero-dynamic penetration.
This helmet comes standard with a clear visor.

The Quantum one-piece suit takes design and aesthetics to a new level. Of course, this suit was created with dimensions of graphics and textures in mind, but it also highlights how good a suit should feel while riding. Thanks to the strategic placement of the stretch panels, the Quantum offers full freedom of movement on the bike, allowing the rider to attack each turn with ease, hanging off the bike as much as possible. On top of the dual comp knee sliders, the Quantum is equipped with dual comp elbow sliders as well, making sure there are plenty of reference points available to explore the limits of physics when searching for maximum inclination on track. A fine combination of highly abrasion-resistant debossed and perforated leather and MotoGP- spec impact protectors, the Quantum is the quintessential suit to hone your track skills and feel safe on the road while sporting an unmistakable look directly derived from professional motorcycle racing. Outer Garment
Monaco Performance cowhide Monaco cowhide perforated cowhide 3D air mesh neoprene PWR|shell stretch Lorica® nubuck leather
Protection
prepared for SEESOFT™ level 2 back protector insert - Type RV SEESMART™ level 1 hip protector Betac® Protection prepared for Divided Chest Protector SEESOFT™ level 1 dual-comp elbow and knee slider dual-comp protective parts at shoulders
Other features
race fit (tight) perforated VCS|speed hump hydra bag prepared aero cool 3D mesh calf zippers comfort cuffs removable lining stretch lips stretch panels inner pocket

LS2 FF327 Challenger
UV-resistant layer security certification 3 bowls made of HPFV
Shell sizes
LS2 offers multiple case sizes, custom-sized EPS protective films and our high-performance, high-quality comfort filler as well as 3D laser-cut plastic foam for a perfect fit and comfort throughout the day.
It is made from HPFC
The high performance fiberglass composite material consists of carefully layered layers of a unique resin preimpregnated fiberglass fabric to form a tough, ultra-light and inflexible casing or shell that disperses impacts in a safer manner.
Cooling system
LS2 helmets have a so-called "Dynamic Flow-through Ventilation". Multiple adjustable inlet ducts and EPS damping with air ducts in conjunction with the rear spoiler and exhaust ducts provide permanent ventilation to provide the driver with cool and comfortable conditions.
Metallic security badge
This small metallic triangle is an exclusive LS2 feature, which additionally strengthens the connection of the helmet band with the helmet.
Quick release
The metal buckle combines with a high-quality chin strap with a plastic tongue with teeth. When closing you hear a soft "click". As far as locking until you reach a comfortable but tight seat. Pull the ribbon to unlock the tongue. Further adjustment options are provided by the chinstrap on the side of the metal buckle.
Emergency release system
Our emergency release system allows the emergency service to remove the helmet pads and thus create an additional space for helmet removal with minimal movement of the injured person s head and neck. It is recommended that someone holds the helmet to avoid movement when removing the padding. Slide your finger into the red ribbon and gently pull on it to remove the pads. Slide the side pads over the straps and remove them from the helmet.
Visor
LS2 visors are made from 3D optically correct "A-class" polymers, a space exploration polymer with high resistance to impact energy and maximum visibility. Our visors are stable, scratch-resistant and UV-resistant. All this combined with the ultimate PINLOCK technology provides the most advanced anti-fog standard.
Quick disassembly system
This system (patent pending) simplifies the change of the visor with the bare hands. The spring detent built-in with detent pin secures a perfect fit without air gaps when the visor is closed.
Comfort lining
All LS2 helmets have removable and washable inner lining to keep them fresh and new. Our anatomically designed cheek pads are based on LS2 s 3D laser technology for a perfect fit. We use hypoallergenic substances, which carry away the moisture, in order to ensure the driver always pleasant conditions.
Chinguard
A high-quality fabric placed in front of the chin reduces the airflow in the driver s face and makes it easier to drive. The chin guard is removable when hot.
Hypoallergenic
We use hypoallergenic substances that support the moisture transport and ensure a comfortable fit.
Laser cut upholstery
Foam with different densities is laser cut in 3D and adapts perfectly to the driver s head shape.