These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.
Socket Tray Herramienta de almacenamiento de garaje multifuncional Soporte para rack Organizador de plásticos para el hogar Accesorios Soporte de estante Reparación del hogar
The Stanley FatMax fine cut handsaws have a bi-material handle screwed and ultrasonically welded for comfort and security. The teeth are precision set to generate clearance of kerf for the blade to cut on both the forward and back stroke, increasing cutting efficiency by 30%. These 3 sided teeth are precision ground to offer razor sharp cutting edges at every stage of the stroke. They are induction hardened to stay sharper for longer. Fine cut blade 11 tpi.Length 500mm (20 tpi)
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 4.0mm (5/32 in)
The Hitachi DN18DSL/L4 Angle Drill 18 Volt with a lightweight, compact design and a 10mm keyless single sleeve chuck. It is the class leader, with a low centre height of 23mm, for easier working in confined spaces. The variable speed paddle and battery life indicator mean more effective work time and less down time. The drill is fitted with a soft grip for improved comfort and control. There is also a handy white LED work light and a belt clip, which can be fitted on the left or right hand side. It has an all new design and is compatible with the full range of 18 Volt slide tools, accepts all Hitachi 18V Li-Ion slide batteries from 1.5Ah to 5.0Ah ( please note this machine is supplied BARE, WITHOUT a battery). Bare Unit, No Battery or Charger Supplied. Specification No Load Speed: 0-1,800/min.Max Torque: 12Nm.Capacity: Wood: 28mm, Steel: 10mm.Centre Height: 23mm.Head Height: 88mm.Overall Length: 326mm.Weight: 1.7kg.
