HJC IS-17 Lorenzo Angel 99 Casque Noir Blanc Rouge S

Features:Fits models : CH13, CH14, CH15, CV13, CV14, CV15CV16.Specification:Name: CarburetorMaterial: MetalColor: SilverCarburetor Dimensions:Engine Opening O.D.:27.5mmBolt Hole Spacing:52mmNote:1.Please allow 1-3mm errors due to manual measurement.Package Included:1 X Carburetor

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Leichtes und einfaches Design für erhöhten Tragekomfort und ein hervoragendes Gefühl am Lenker Langlebige und flexible Materialien für einen guten Sitz Ausgeprägte Graphics, die nicht verblassen Handflächen aus synthetischem Leder mit doppelter Verstärkung am Daumen

Feature:1. 100% brand new and high quality.2. Used widely for car fender, bumper, door or other car surface.3. High quality plastic material, durable.4. Application: for Toyota, for Honda, etc.5. Easy to use.Specification:Model number: 994265Product name: ClipsCondition: Brand new and high quanlity!Material: PlasticColor: BlackItem Type: Fastener ClipItem Height: 28 mmItem Width: 17.5mmHole size: 8mmQuantity: 50 pcs /setPackage Included:50 X Car Fastener Clips

Jacke aus Vintage Leder im Used-LookPRODUKTMERKMALEKariertes Baumwoll-Innenfutter Reissverschlüsse mit automatischer Arretierung am Ärmelstulpen 4 Aussen- und 2 Innentaschen Hüftversteller Schlaufe zum Verbinden mit der Gürtelschlaufe der Hose Höhenverstellbare Schulter- und Ellbogenprotektoren Tech90 (TP-02), Bauart geprüft nach EN 1621-1:2012, Level 2 Tasche für Rückenprotektor (Rückenprotektor PROTECT V2 (X99557), Bauart geprüft nach EN 1621-2:2014, Level 1 optional nachrüstbar) GRÖSSENHerren 48 - 60 MATERIALObermaterial: Büffelleder Futter: 100% Baumwolle Armfutter: 100% Polyester Enthält nichttextile Teile tierischen Ursprungs

Outer shell
750 D Tactel material from DuPont Contains non-textile parts of animal origin
Lining
mesh lining (100% polyester)
Membrane
detachable waterproof, windproof and breathable HUMAX Z-liner® inner (100% polyester with 100% polyurethane coating)
Fit/features
3 external pockets air-vent zippers large stretch panels in the thigh, knee and calves for a perfect fit waist belt elasticated waist PITTARDS® leather anti-slip seat patch
Protection
optional hip protectors EN 1621-1 CE-approved height-adjustable SAS-TEC® 3D knee protectors reflective sections Connecting zip