Colorful Galaxy Print Tapestry Wall Art

50Pcs Green Muskmelon Seeds

Henry Squire G3 Round Section Hard Boron Alloy Chain is part of the Stronghold range of Squire chains. These chains offer very high security. Ideal for locking perimeter gates, substations, heavy goods vehicles etc. These chains would be recommended where there is an increased health and safety risk to the public or employees. Any chain displaying the Sold Secure logo has to undergo extensive and prolonged attack tests. This range has achieved Silver, proving that they are worthy of the respected Stronghold name. CRIMESTOPPERS supported. Size: 900 x 10mm.

41cm Reptile Turtle Floating Basking Platform

Saison:Hiver,Automne; Artisanat:Imprimé; Type:Couvertures et Jetés; Matière:100% Microfibre; Dimension:/; Motif:Couleur Pleine; Caractéristiques:Confortable,Doux,Réchauffeur; Date de l'annonce:01/13/2023; Mode de production:approvisionnement externe

Quantité:1 pc; Forme:Irrégulier; Type:Porte Papier Toilette; Style:Moderne; Finition:Acier inoxydable; Type d'installation:Montage mural; Matériau:Acier inoxydable / fer; Type:Porte-papier toilette; Caractéristiques:Frais,Nouveau design; Dimensions nettes:29.012.012.0; Poids Net:0.5; date d'inscription:09/14/2018; Mode de production:approvisionnement externe; Produits spéciaux sélectionnés:nouveau,COD

The Forge Tubular Mortice Latch for internal doors can be used with any lever latch handle, lever on rose handle or door knob. Supplied with screws and fitting instructions.Fitting Instructions:1. Mark a height line on door face and edge as well as a centre line on door edge.2. Drill a Ø23mm hole into door edge to accept the latch body, and a Ø19mm hole in door face for the spindle bar measuring from the door edge (43mm for 65mm latch, 60mm for 80mm latch).3. Fit latch and use a pencil to mark around the faceplate. Chisel out so the faceplate lies flush with door edge.4. Transfer the height line onto the door frame and mark a vertical line at half the door thickness from the door stop.5. Drill a Ø16mm hole, 10mm deep at this point and square out with a chisel. Position the striking plate over this hole, mark around with a pencil and chisel out to lie flush.Case size: 65mm (2.5 inch). Backset size: 44.5mm. Forend finish: Nickel. Supplied with matching screws, face plate and strike.