Beaux arbres colorés imprimer rideau de douche en tissu imperméable pour salle de bain décor à la maison rideaux de baignoire couverts doublure comprend avec crochets

The Hozelock 6755 Sprinkler hose is a perforated flat hose, which produces a gentle sprinkler effect when used upright and a deep soaking action when reversed. The hose is supplied with end cap and screw-in connector and can be used in series. Length: 15 metres (50 feet).Maximum area coverage: 15m x 3.6m (54m²).

KCASA KC-OP084 Stainless Steel Orange Peeler Parer Vegetable Fruit Peeling Device Kitchen Tools

Artisanat:A plis,Jacquard,Matelassé; Composition:1 pièces (1 housse de couette, 1 drap, 2 housses d'oreiller); Style:Uni; Matière:Polyester; Type de fermoir:Fermeture; Type d'article:Ensembles housse de couette; Motif:Couleur unie / unie; Date de l'annonce:01/13/2023; Taille de la housse de couette:; Taille de la feuille plate:; Taille de la taie d'oreiller:; Source de données du guide des tailles:Fourni par le fournisseur.

Karcher 3-in-1 stone cleaner is ideal for cleaning stone or facades and provides protection for the surface. It is suitable for use with all Karcher pressure washers. The 3-in-1 formula is a powerful dirt dissolver as well as a high algae, wind and weather protector.

Thème:Décorations de Noël; Quantité:1pc; Type:Objets décoratifs; Caractéristiques:Décorative; Dimensions nettes:4.541; date d'inscription:07/04/2019; Mode de production:approvisionnement externe

The Forge Tubular Mortice Latch for internal doors can be used with any lever latch handle, lever on rose handle or door knob. Supplied with screws and fitting instructions.Fitting Instructions:1. Mark a height line on door face and edge as well as a centre line on door edge.2. Drill a Ø23mm hole into door edge to accept the latch body, and a Ø19mm hole in door face for the spindle bar measuring from the door edge (43mm for 65mm latch, 60mm for 80mm latch).3. Fit latch and use a pencil to mark around the faceplate. Chisel out so the faceplate lies flush with door edge.4. Transfer the height line onto the door frame and mark a vertical line at half the door thickness from the door stop.5. Drill a Ø16mm hole, 10mm deep at this point and square out with a chisel. Position the striking plate over this hole, mark around with a pencil and chisel out to lie flush.Case size: 65mm (2.5 inch). Backset size: 44.5mm. Forend finish: Nickel. Supplied with matching screws, face plate and strike.