Bahco 9029T Slim Jaw Adjustable Wrench 150mm 6in

The Britool E117377B Ratchet combination spanners have a 5° ratcheting head and a 12-point OGV® ring end, which is angled at 15° from the handle axis (increment angle 30°). The OGV® Ring profile maximises contact surface with the nut for a longer lifetime.The switch to change ratcheting direction built into the handle prevents accidental change.Forged from Chrome Vanadium steel with a high chrome finish. ISO 691 - ISO 1711-1.The Britool BRIE113302B Ratcheting Spanner 9mm has the following dimensions:Size: 9mmLength: 142mmWeight: 40g

Casco Solar-Alimentado de Soldadura de Oscurecimiento Automático Máscara de Soldadores de Arc Tig Mig Molienda

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken.Shank: 1/4in.D - Diameter - 15/64in 6.0mmC - Cutting Length - 5/8in 16mmT.C.T. 2 Flutes.

All purpose rubber mallet, used by professional tradesmen in the automotive industry and in maintenance workshops. Also suitable for DIY tasks and applications where a steel head is unsuitable. Featuring self-locking handles to deliver a gentle but firm blow with little rebound. The wooden handle is contoured to provide a comfortable grip during use.Colour : Black.Size : 57mm (2.1/4in).Weight : 567g (20oz).Face : 57 mm.

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

Wera 1355 Pozidriv tip screwdriver with multi-component Kraftform® Comfort handle with anti-roll protection. The round blade is chrome plated with a black tip.Size PZ1 x 80