DEWALT Universal stirring/mixing tool for hand-held drills with a 13 mm chuck. Mixing effect from bottom to top. Suitable for DW130 Specifications Diameter: 100 mm Length mm: 600 mm
5 Bogen mit funkelnden Kristallkunst-Schmucksteine rund 2 aus Kunststoff, selbstklebend, Bogengröße: 10 cm x 30 cm, verschiedene Farben (klar irisierend, lachs irisierend, goldgelb irisierend, altrosa irisierend und türkis irisierend). Durchmesser eines Schmucksteins ca. 1,2 cm, 102 Schmucksteine pro Bogen. Die runden Schmucksteine sind selbstklebend, sodass Sie sie vorsichtig zusammen mit der ...
Faithfull quality scratch brush with bristles made from hardened and tempered steel. For use in preparatory work, when removing rust, scale, old paintwork and grouting. The handles are drilled for hanging. The wire is 28 gauge and is hardened and tempered.Size: 2 Row.
Hardened steel punches carefully heat treated for long life.Precisely knurled body with square head which gives a good striking area and prevents the punch from rolling.Walleted set of 4 containing one of each of the following sizes.1/16, 3/32, 1/8, and 3/16 in.Length 4 in
1 XL Relief-Sticker "Schneemann auf Holzpaneelen", selbstklebendes Motiv, ca. 40 cm x 23 cm, mit Relief-Charakter, in Holz-Optik, Bogengröße ca. 41 cm x 24 cm. Anleitung ▪ Den Relief-Sticker von der Trägerfolie nehmen. ▪ Das Motiv kann nun auf alle glatten, staub- und fettfreien Untergründe wie Papier, Pappe, Glas, Acryl etc. aufgebracht werden. ▪ Den Sticker mit der Hand andrücken und eventuel...
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90° D = 6.3 mmC = 25.4 mm
