Kostenlos
Unterstützung
The Ridgid Micro LM-100 Laser Distance Measure provides simple, quick and accurate distance readings with its ultra-sharp Class II lasers. Distance reading will appear on the easy to read LCD display. The measure enables professional tradesman to quickly determine run distances for bidding, calculate the distance of piping runs, measure trouble spots down the line and quickly determine spacing for code compliance. Measures feet, inches and metres. Stores up to 20 measurements. Bright Backlit Display allows use in poorly lit areas. Rugged over-moulding allows excellent grip. Measurement calculations: area, volume, and indirect measurement calculations. Specification Accuracy: ±1.5mm.Operating Range: 50m.Power Supply: 2 x AAA Batteries (Included).Protection Class: IP 54 (dust & water splash).
These Forgefix Clout Nails have a large head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing. The nails are galvanised for increased resistance to corrosion.Suitable for roofing of all types. APPLICATION:Specifically used when roofing felt is being fitted to either shed or similar types of roofs. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.Clout Nail Galvanised 40mm Bag Weight 500g
The Makita HP2071F Percussion Drill is fitted with a high power motor but packed into a slender and compact body with durable metal gear housing (with a keyless chuck). The new reversing system allows extended service life of carbon brush and no power reduction even in reverse rotation. It is fitted with a torque limiter, the drill stops when the bit hits against reinforcements. It is supplied with a side handle, depth stop and a carry case. Specification: Input Power: 1,010W No Load Speed: 0-1,200/0-2,900/min Impact Rate: 0-24,000/0-58,000/bpm Capacity: Steel 18mm, Masonry 20mm, Wood 40mm Weight: 2.4kg Vibration Hammer Drilling : 16 m/sec² Vibration K Factor : 1.5 m/sec² Noise Sound Pressure : 99 dB(A) Noise Sound Power : 110 dB(A) Noise K Factor : 3 dB(A)
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3125 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 120.Pack quantity: 5.
Theme:Novelty; Style:Modern; Material:Polyester; Features:Adorable,Machine wash; Shipping Weight:0.155; Net Weight:0.155; Listing Date:12/25/2020; Production mode:Self-produce; Size:25251
The Facom JET.C4M4 Tool Chest 4 Drawer is a tough, durable storage system, featuring a large amount of storage space and protection. The chest can be stacked on a rolling chest of same dimension, and is supplied with a linking kit for easy and secured fitting of the unit. The Tool Chest has the following drawers, each able to hold 4 modules: 3 x 60mm high drawers and 1 x 130mm high drawer. Specification Capacity: 16 Modules. Total Load: 105kg.Storage Volume: 100 litres.Weight: 51.5kg. Overall Dimensions: 96.4 x 54.6 x 48cm.Effective Drawer Dimensions: 56.9 x 42.1 x 60-130mm.