Featuring 24 torque settings this 18 Volt compact drill driver is also designed with a two speed gear box.The soft grip overmould design on this Ryobi RCD180M provides both reduced vibration and an enhanced grip.
The Bulldog Square Punner (tamper) has a one piece head design and a large, square, solid-cast head. The handle is made from tubular steel. It is ideal for finishing work on asphalt surface, to tamp up close to walls and corners where mechanical rollers leave ridges or cannot get access. Part of Bulldog's Premier Agricultural Tool range, manufactured to the highest possible specification to guarantee quality. Made In Britain.
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.
This Forge Auto Gate Latch will automatically latch when the gate is pulled to the closed position. Ideal for gates in fields where easy access is preferred over security. Also used widely for garden gates. Supplied with all fixings and fitting instructions. Fitting Instructions:1. Position the keep on the fence post and mark the fixing holes with a pencil. Drill pilot holes with a Ø2mm drillbit and fasten in place using screws provided.2. with the gate closed, position the latch arm so that it is engaged in the lock and screw into position using the fixings supplied.Finish: Black Powder coated.
