Kostenlos
Unterstützung
Portaequipajes de techo con barra de luces para 1/10 RC Crawler Axial SCX10 D90 110 Traxxas TRX-4 Tamiya HSP RC Piezas de automóviles
Features: 30 super bright LEDs: 30 bright solar-powered LEDs produce over 200 lumens in total to provide lighting and security to your garage, pathway, etc. Long working time: 6 to 8 hours of illumination after fully charged about 6 to 8 hours . Efficient solar panel: amorphous solar panel allows to generate electricity in all lighting conditions, including cloudy, shady and weak light environments. Motion sensor: automatically illuminate when motion is detected within 1-5 meters of the device with a PIR sensor. 3 control dials: SENS, determine the range of motion detection (1-5 meters). TIM, sets duration of illumination time (10s-60s). LUX, adjust the sensor to the desired level of darkness that for the light to turn on. So, you can adjust the light to turn on automatically in well-lit environments also. Adjustable solar panel: to fully absorb the sunlight, the high quality amorphous solar panel can be 360 degree revolve. Easy DIY installation: no wiring required, comes with a mounting plate + screws, or mount with a ground spike. Simply choose a desired location to mount the solar light and panel. Mount successfully within minutes. LiFePO4 lithium battery: more environment-friendly, more stability, no harm chemicals. ABS housing cover with IP65, water-resistant, weather-proof, suitable for outdoor using. Wide application: this security light is great for lining paths and driveways and provides a quick and easy lighting solution, such as walls, garden, pathway, etc.
Adam Hall by Procab Audio Kabel 1x Klinke stereo männlich 6,3 mm auf Klinke stereo männlich 6,3 mm 1,5m Technische Daten Art No.: RMC305 Type of cable: Microphone cable balanced Inner conductor: BC 20 x 0.12 mm Inner conductor section: 0.22 mm² Conductor twisting: Yes Number of conductors: 2 Isolation: Foamed PE, Ø 1.6 mm Isolation color: Red / White Shielding: BC 16 x 4 x 0.12 mm, braiding Shielding %: 100% Filler: Cotton yarn Separator: Cotton paper Outer jacket: Flexible PVC Outer jacket color: Black Outer jacket diameter: Ø 5.9 mm Printing color:Wwhite Printing text: Procab RMC305 Type of packing: reel for 100 meter Temperature range fixed installation: Fixed installation: -40° C to +80° C Flexible installation: -25° C to +70° C Bending radius: Fixed installation: 6 x outer diameter lexible installation: 8 x outer diameter
ACHTUNG: Bundleartikel inkl. 2x PULSAR PL 110 FA + Linear Sub 1500 A Subwoofer aktiv B-Ware! Die aktive Pulsar PL 110 FA ist eine 10-Zoll-Box mit bemerkenswert präsentem Tiefgang und das bei kompaktesten Maßen. Mit 1.000 Watt Leistung und neuester DSP Technologie ist sie auf Fullrange-Sound ausgelegt. Das intelligente Limiting verhilft auch der kleinsten Box der PULSAR Serie bei starken Bassimpulsen zu einer stabilen Mitten-, und Höhenwiedergabe. Unterstützt werden die guten akustischen Eigenschaften durch das schwingungsarme Holzgehäuse für mehr Schalldruck und ein gleichmäßiges Klangbild. Zusätzlich bietet HK Audio umfangreiches Zubehör für den Flugbetrieb sowie Schutzhüllen und Montagestangen. Features Erstaunliche Bassfestigkeit bei hohen Pegeln Sehr ausbalancierter Klang, Stand-alone wie mit Sub Kompakte Abmessungen Kantenschutz aus stoßfestem Plastik Holzgehäuse für beste Akustik Umfassende DSP-Funktionen 3-Kanal-Mischpult Optional: Flugzubehör, Schutzhülle, Montagestange Made in St. Wendel, Germany Technische Daten ACHTUNG: Bundleartikel inkl. 2x PULSAR PL 110 FA + Linear Sub 1500 A B-Ware! Modell PL 110 FA Max SPL 132 dB half space Gesamtleistung 1000 Watt Frequenzgang +/- 3 dB 70 Hz - 16kHz Frequenzgang -10 dB 58 Hz - 18kHz Verstärker Tief-Mittelton 650 Watt @ 4 Ohm Verstärker Hochton 350 Watt @ 4 Ohm Aktive Schutzschaltungen Undervoltage-Protection, Thermo-Protection, Short- Circuit Protection, Overcurrent-Protection Eingangsempfindlichkeit +4dBu @ Gain Centerclick Schutz Subsonic Filter, Peak Limiter, RMS Limiter, Auto Standby Anschlüsse 2 x XLR- Kombibuchse IN, 1x Stereo Cinch IN, 2 x XLR- Thru, 1 x XLR-Mix Out Tief/ Mitteltonlautsprecher 10\" mit 2\" Schwingspule (4 Ohm) Hochtontreiber 1\" mit 1\" Schwingspule (16 Ohm) Horncharakteristik 90° x 55° CD Horn Klangregelung 2 EQ Schalter: System-Monitor / Stand Alone u. Flat / Contour Subsonic Filter ja Peak limiter ja RMS-Soundlimiter ja Endstufen Class D - Biamped Sensitivity - Schalter ja - Line/Mic Input A Hochständerflansch Duo Tilt 3/7 Flugpunkte 5 x M8 Griffe 1 integriert Optionales Zubehör Schutzhülle, Flugbügel, Anschlagpunkt, Distanzstange Gehäuse Hybrid (MDF, Span) Frontgitter 1mm Metallgitter mit schwarzem Akustikschaumstoff Oberfläche Acryllack, Schwarz Abmessungen (BxHxT) 34,3 x 49,1 x 37 cm Gewicht 16 kg Linear Sub 1500 A Subwoofer B-Ware: Kompakter Aktiv-Bass 1200 Watt Class-D Verstärkerleistung 1x 15\" Speaker 131 dB Max SPL Peak @ 10% THD (Halfspace) Ideale Ergänzung zu den Topteilen der LINEAR 3-Serie Auch einsetzbar in Kombination mit LINEAR 5-Topteilen oder als Bass-Erweiterung der ELEMENTS-Systeme EASY BASE, SMART BASE und LINE BASE Äußerst robustes Holzgehäuse Einstellbare X- Over-Frequenz Integrierte HK Audio MultiGrips Max SPL 129 dB Halfspace (@ 10% THD) Max SPL peak 131 dB Halfspace (@ 10% THD) Max SPL calculated 132 dB Halfspace Frequenzgang +/- 3 dB 49 Hz - X-Over Frequenzgang -10 dB 45 Hz - X-Over Gesamtleistung 1200 W Endstufen Class D Aktive Schutzschaltungen Undervoltage-Protection, Thermoprotection, Short-Circuit-Protection, Overcurrent-Protection, Subsonic 24 dB/Okt., Peak-Limiter Basslautsprecher 1x 15\" Trennfrequenz aktiv 100/120 Hz wählbar mit 24 dB/Okt. Anschlüsse 2x XLR/Klinke-Kombi In symm., 2x XLR Thru symm., 2x XLR Line Out Mid/High Eingangsempfindlichkeit +4 dBu @ Gain Centerclick Hochständerflansch 1x M20 (K&M) Griffe 2x HK Audio MultiGrip Gehäuse MDF 16 mm Frontgitter 2 mm Metallgitter mit schwarzem Akustikschaumstoff Oberfläche Acryllack, schwarz Optionales Zubehör Schutzhülle, Stereo Pole Add-On M20, Tilt-Unit, 100 mm-Rollen Abmessungen (BxHxT) 48,5 x 48,5 x 59,5 cm Gewicht 29,8 kg / 65,7 lbs.
The ADJ Mega QA Go is a compact, low profile battery powered LED Par designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique ?sit-flat? design so that it may sit directly on the ground or inside truss without the scissor yoke because the power & DMX ins and outs are mounted on the side of the fixture, not on the rear. The Mega QA Go features 5 x 4-Watt, 4-IN-1 RGBA LEDs which offers smooth Color Mixing, has a 40-degree beam angle, 5 operational modes (including DMX, Sound Active Mode, RGBA Dimmer Mode, Auto Run Mode, & Static Color Mode), and has 8 DMX Channel modes for a variety of programming options. Users can also use the Airstream IR App or ADJ UC IR wireless remote, which is sold separately, to control the Mega QA Go. Technische Daten Rechargeable Lithium battery life: 4 hours full on (with a full charge); 5.5 Hours in Energy Saving Mode (with full charge, 4 hours charge time Stand Alone or Master/Slave Configuration Beam Angle: 40 degrees 64 built-in Color Macros DMX-512 protocol Color strobe effect Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers Compatible with UC IR wireless remote (sold separately) & Airstream IR app Linkable via 3-pin XLR cable Electronic Dimming: 0-100% Flicker Free Includes a scissor yoke to hang on truss, mount on a wall or set on the ground Ultra bright slim flat black Par with 5 x 4-Watt, 4-IN-1 Quad RGBA LEDs (rated at 50,000 hrs.) Smooth color mixing (fast or slow color change operation) Unique ?sit-flat? design: Power & DMX Ins/Outs intelligently designed so the unit can be set flat on the ground or set inside truss Rechargeable Lithium battery built-in to fixture 8 DMX Channel modes: 1, 2, 3, 4, 5, 6, 7 or 8 channel modes 5 Operational modes: Auto Run Mode (16 Color Change Mode, 16 Color Fade Modes, & 1 Combined Mode), Sound Active Mode (16 Modes), RGBA Dimmer Mode, Static Color Mode (64 Colors), and DMX Controlled Digital DMX Display with 4-button menu for easy navigation Power Draw: 28W Max IEC AC input and out put on the side of the fixture to daisy chain the power cords (link up to 20 fixtures) Multi-voltage operation: AC 100V-240V 50/60Hz Dimensions (LxWxH): 5.5\"x 9\" x 10\"/ 253 x 227 x 140mm Weight: 4 lbs./ 1.9 kg.
Die HD 15-A ist in ihrer Produktklasse einzigartig. Ihr Kompressionstreiber mit eigens entwickelter Kalotte und Hochleistungsschwingspule genügt höchsten professionellen Ansprüchen und sorgt für Durchsetzungsvermögen und überragende Stimmtransparenz. Der 15-Zoll-Hochleistungstieftöner bietet mit seinem äußerst linearen Frequenzgang eine präzise, kontrollierte Tieftonwiedergabe. Die 1400-Watt-Endstufe wird von einem leistungsfähigen digitalen Signalprozessor gesteuert, der Frequenzweiche, Klangregelung, FiRPHASE, Soft Limiting und Lautsprecherschutz kontrolliert. HOCHWERTIGE SCHALLWANDLER Die Präzisionsfertigung der Tieftöner und Kompressionstreiber stützt sich auf moderne Produktionstechnik und die professionelle Expertise und Erfahrung, mit der RCF die Umsetzung allerhöchster Standards erreicht. LEISTUNGSSTARKE CLASS-D-ENDSTUFEN Die Class-D-Endstufentechnologie von RCF kombiniert große Leistungsreserven mit hohem Wirkungsgrad und geringem Gewicht. D-Line Endstufen zeichnen sich durch ein extrem schnelles Ansprechverhalten, realistische Transientenwiedergabe und ein beeindruckendes Klangbild aus. Die robuste Gehäusekonstruktion aus Aluminium schützt die Endstufe während des Transports und unterstützt gleichzeitig die lüfterlose Wärmeableitung. Alle D-Line Endstufen verfügen über Schaltnetzteile für minimales Gewicht und maximale Leistung. IDEAL FÜR DEN VERLEIH Die Gehäuse der D-Line sind aus speziellem Polypropylen geformt und so konstruiert, dass Vibrationen selbst bei maximaler Lautstärke wirksam gedämpft werden. Von der Gehäuseform bis zur Oberflächenstruktur bietet die D-Line maximale Zuverlässigkeit und Robustheit selbst bei intensivem Tour-Einsatz. Die moderne belüftete Architektur ermöglicht höchste Wirkungsgrade bei minimaler Verzerrung. Neben dem Tragegriff an der Oberseite verfügt die HD zur besseren Transportfähigkeit über zwei seitliche Griffe mit Gummipolsterung. FÜR HÖCHSTE ANFORDERUNGEN Die vielseitig nutzbare Gehäuseform erlaubt den Einsatz jedes D-Line Modells in der Standardkonfiguration oder als Bühnenmonitor. Zwei M10- und drei M6-Gewindeeinsätze stehen für die optionale Montage-Hardware zur Verfügung. Damit eignen sich die Lautsprecher optimal für montierte oder geflogene Anwendungen. In Kombination mit Lautsprechern der SUB-Serie wird die HD zur PA-Anlage mit enormen Leistungsreserven. Technische Daten Spezifikation Frequenzgang: 45 Hz ÷ 20000 Hz Max SPL @ 1m : 130 dB Horizontaler Abstrahlwinkel : 90° Vertikaler Abstrahlwinkel : 60° Schallwandler Kompressionstreiber: 1.0\", 1.75\" v.c Woofer : 15\", 2.5\" v.c Input/Output Sektion Eingangssinal: bal/unbal Eingangsbuchsen: XLR, Jack Ausgangsanschlüsse: XLR Eingangsempfindlichkeit: -2 dBu/+4 dBu Mic Eingangsempfindlichkeit: -32 dBu Prozessor Übergangsfrequenz: 1800 Hz Schutzschaltungen: Thermal, RMS Limiter: Soft Limiter Steuerung: Volume, Boost, Mic/Line Power Section Gesamtleistung: 1400 W Peak, 700 W RMS HF Bereich: 400 W Peak, 200 W RMS Tiefe Frequenzen: 1000 W Peak, 500 W RMS Kühlung: Convection Verbundene Einheiten: VDE Physikalische Daten Gehäuse Material: PP Composite Hardware: 1 x M10 top, 1 x M10 bottom, 2 x M10 side Griffe: 1 Top, 2 Side Gitter: Steel Farbe: Black Größe Höhe: 714 mm / 28.11 inches Gesamtbreite: 442 mm / 17.4 inches Verpackung Tiefe: 397 mm / 15.63 inches Verpackungsgewicht: 22 kg / 48.5 lbs Versandinformationen Verpackung Höhe: 700 mm / 27.56 inches Verpackung Breite: 450 mm / 17.72 inches Verpackung Tiefe: 500 mm / 19.69 inches Verpackungsgewicht: 24.5 kg / 54.01 lbs
