Uvex HLMT 5 Pure Orange XS S

RX-7V Ventilation New diffusers are 20mm longer and straightened for improved aerodynamics, working together with the Air Wing to improve stability. Compared to the previous diffusers, the efficiency of the intake scoops of the new diffusers has increased by 19%. The new air intake vents not only have more adjustability with three positions, closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion. Shell Construction: PB-SNC2 Peripherally Belted Structural Net Composite Arai´s proprietary (super fibre belt) Peripheral Belt, borrowed from our F-1 technology, maximizes shell strength and flexibility while maintaining low weight. Positioned across the top of the eye port, this band allows the use of a thinner EPS liner which greatly enhances the upward field of view – especially appreciated in a full racing tuck! The Structural Net Composite adds a physical bond to the resin bond of the many layers of fibres and reinforcing materials within the shell. Variable Axis System (VAS) With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard. Ventilation: Free Flow System (FFS) Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. Ventilation: Eyeport Airchannel Enhanced air exhaust from the eye port area, pulled through dedicated air channel to side ducts, improving efficiency and reducing noise. Front Ventilation: Center top vent The new Top Vent provides 11% more airflow than the previous Vent. The new bigger switch makes opening and closing easier. The new Top Vent has three positions, closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed. Front Ventilation: Diffuser system The new diffusers are 20mm longer and straightened for improved aerodynamics, working together with the Air Wing to improve stability. Compared to the previous diffusers, the efficiency of the intake scoops of the new diffusers has increased by 19%. The new air intake vents not only have more adjustability with three positions, closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion. Front Ventilation: Brow vents extended to temple area Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. Rear Ventilation: Neck exhaust vent To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet. Rear Ventilation: Side exhausts Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance. Aerodynamics: Pull Down Chin Spoiler Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable. Aerodynamics: Patented Air Wing® adjustable MotoGP tested and designed to greatly reduce drag, turbulence and buffeting resulting in more comfort and additional top-speed. It improves stability of the helmet at high speeds or when braking hard and reduces noise. Depending on the model the Air Wing is adjustable in five different angles of attack positions to suit every riding position. Visor: VAS Max Vision Visor with De-Mist option VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. Visor: Pinlock insert lens included Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily. Interior: Antimicrobial Liner New exclusive liner with antimicrobial stays fresher between cleanings. Interior: Replaceable Interior Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Neckroll Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Facial Contour System (FCS) To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure. Interior: 5mm ’’Peel Away’’ Ear cups/Cheek pads Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed. Interior: 5mm ’’Peel Away’’ Temple pad Arai´s peel-away temple crown pads give the option of 5 mm more interior with* if needed. Comfort: Emergency Release System (ERS) Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury. Comfort: Breath guard Works in conjunction with the dual-pivot® chin vent to better direct fresh air to the inside surface of the shield while at the same time directing hot breath down and away from the inside surface of the shield. Comfort: Chin Curtain Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further. Approval: ECE 22-05 The most common helmet certification internationally, required by over 50 countries worldwide. Approval: SNELL M2010/2015 The American SNELL Memorial Foundation is an independent organisation, SNELL M2010 is their latest new, more shock-absorbent standard. For the M2010 standard a steel ball shaped rather like a tennis ball anvil is used, they also test with flat and “kerb” shaped anvils). The impact test area of SNELL is larger than that of ECE. Multiple impacts and a penetration test on random spots are used. Five times inspected Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. All-day comfort All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Smooth shape, better protection The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact. Hard outer shell, soft inner shell Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. 5-year limited warranty All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.

This mini cam is the best way to capture and relive exciting moments. Easy to use, it allows immediate viewing of the shots taken thanks to its touchscreen display.
Its compact size, rounded edges and reliability make it extremely practical. Easy-mount attachment kit included as standard.
Features hardware techniques:
LCD display screen: 2.0-inch touch screen Image sensor: 1.3 million pixel (CMOS) Storage medium: microSD card Image resolution: 5.0 Mega Pixel (2592x1944), 3.0 Mega Pixel (2048x1536), 1.3 Mega Pixel (1280x960) Video resolution: 720P (1280x720) Pixel@23-31fps VGA(640x480) Pixel@49-63fps (default) Video with audio: YES Built-in microphone: YES Interface: USB 2.0 Power Supply: Built-in 3.7V rechargeable lithium Battery life: about 1 hour Water-resistant: up to 10 m Dimensions: 66x43x27mm Weight: 46g (without battery)
Technical Details:
High definition recording: YES Recording assisted: YES Anti vibration: YES Digital zooming: 4X Camera lens: F3.1 f=9.3mm Shutter: Electronic Visual angle: 120° EV compensation: Auto Sensitivity: Auto White balance: Auto Language: English Operating system: Microsoft Windows 2000, XP, VISTA, Windows 7
Equipment:
MOTIONCAMMINILCD Waterproof case USB Cable Mounting belt Handlebar adapter Mounting system for band Instruction manual

Speicification:Material: metal +plasticColor:BlackFeatures:1 sets, completeLong service life and durabilityApplication:For Kawasaki EL EN ER GPZ KLE ZL 500 600 GPZ 500 S 1983-87(Details applicable models, please see the table picture)Numbering:WVCB A9 WVA9 AK WVAK CAB-S16, 13370-08F50(08F00) 13258-04F00Package Included:1 X Carburetor Repair Rebuild Kits

Feature:Invert DC 12V to household AC 220V, power a wide variety of household AC products.Split positive and negative pole access ports, red (positive), black (negative), easy to distinguish.The output port is a universal socket, compatible with most plugs.Independent power switch, directly control the inverter work, independent USB interface, convenient mobile device charging.Intelligent cooling fan, can greatly improve the service life of the inverter.Suitable for family, industry, travel and other activities.Specification:Input Voltage: DC 12VOutput Voltage: AC 220VPower: 900WPeak Output Power: 1600WOutput Frequency: 50Hz +/- 2HzConversion Efficiency: 75%Protection: Overload, short circuit, overtemp, reverse polarity, under/ over voltageMaterial: Aluminum alloyDimension: Approx. 28x11x5.5cm/ 11.02x4.33x2.17Battery Clip Cable Length: Approx. 50cm/ 19.68Package Included:1 X Power Inverter1 X Battery Clip Cable

Twist is an MX helmet made in Airoh’s high resistant thermoplastics (HRT) and expressly designed for the most demanding riders. Its outer shell has an ultra light weight and an aggressive look and is a perfect choice for the most demanding riders to excel in the toughest races. Its lining is highly breathable, removable and washable and provides absolute comfort. Twist also has an adjustable peak and a dust filter (as an added plus for off-road rides). A double D-ring retention system ensures maximum comfort and protection even in the most risky situations. Features
Thermoplastic HRT 1180gr +- 50gr 1 shell size Front vent Chin guard vent Rear vent Removable and washable inner lining (Hypoallergenic) Doppel D-Ring Adjustable peak

hochwertiges Ziegenleder graues perforiertes Ziegenleder in der Innenhand Mesh-Einsätze aus 100% Polyester Verstärkungen auf den Fingern Knöchelverstärkung Stretcheinsätze zwischen den Fingern