Kostenlos
Unterstützung
sonoff 4chr3 is 4gang diy wifi smart switches designed to give you the ability to integrate smart control into your existing home to enable a smart home each smart switch has 4 gangs that can be used to control lights and other home appliances at the same time in four areas of your home
features pre-wired cord with a plug to install in your electrical socket, a output socket to plug your appliance, and the LED display shows current temperature and start/stop temperature. This device is fairly simple to set up and adjust, switch to heating or cooling mode freely. It is very accurate in keeping the temperature at the desired level. Plug and play design, easy to use. It is suitable for freezer, green house, dog house,incubators, etc. Features: Show the measured temperature, start temperature and stop temperature at the same time. Digital tube LED display for clear readings, 4 buttons for easy operation. Pre-wired cord with a plug, plug and play design for convenient use. Heating/refrigeration modes, users can set the start/stop temperature freely. Temperature measuring range: -9C~99C; resolution: 0.1C. Also with temperature calibration function. Indicator light for indicating working status. Suitable for a wide range of applications, such as fish tank, floor heating, green house, etc. Note: This controller can not be used with air conditioner and compressor.
Features:Test AC/DC current, voltage, resistanceLogic measurement and NCV testContinuity and diode testAuto/manual rangeData hold functionMax. Value hold displayAuto power offLow battery indication
The Dormer A108 Metric Split Point HSS Jobber Drill Bits are designed specifically for machining stainless steels. The quick spiral helix enables rapid swarf removal. Manufactured to DIN 338 RW / BS328 / ISO 235. Specification Flute Geometry: Quick Helix, Right hand spiral.Point Angle: 135°: up to 1.5mm: 135° Split Point, 1.6mm, 1/16 and above.Surface Treatment: Blue.Material: High Speed Steel.Tip diameter: 4.50mm.Working length: 47mm.Overall length: 80mm.
These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. These Irwin 10504229 (T301CD) Wood Jigsaw Blades produce fast, fine cuts in hard and soft wood, particleboard, laminated particleboard: 4-60mm and plastics: 4-30mm.
