Kostenlos
Unterstützung
These Forgefix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 4.5 x 70 mm.Box quantity: 100.
features pre-wired cord with a plug to install in your electrical socket, a output socket to plug your appliance, and the LED display shows current temperature and start/stop temperature. This device is fairly simple to set up and adjust, switch to heating or cooling mode freely. It is very accurate in keeping the temperature at the desired level. Plug and play design, easy to use. It is suitable for freezer, green house, dog house,incubators, etc. Features: Show the measured temperature, start temperature and stop temperature at the same time. Digital tube LED display for clear readings, 4 buttons for easy operation. Pre-wired cord with a plug, plug and play design for convenient use. Heating/refrigeration modes, users can set the start/stop temperature freely. Temperature measuring range: -9C~99C; resolution: 0.1C. Also with temperature calibration function. Indicator light for indicating working status. Suitable for a wide range of applications, such as fish tank, floor heating, green house, etc. Note: This controller can not be used with air conditioner and compressor.
Beschreibung Gegenhalter Geeignet für alle geklebten Windschutzscheiben sowie die meisten Heck- und Seitenscheiben. Vierkant-Schneidedraht zum schnellen und einfachen Durchtrennen der gebräuchlichsten Kleberaupen. Sägedraht aus drei vermessingten Stahldrähten gedreht, für besonders breite oder harte Kleberaupen. Robuster Drahtstarter aus Federstahl mit großem T-Griff zum Durchstechen des Drahtes. Gegenhalter mit langem Schaft und stabilem M4-Gewinde sichert den Halt des Schneidedrahtes vom Innenraum aus. Selbstschließende Sicherheits-Zuggriffe halten den Säge- oder Schneidedraht zuverlässig fest. Made In Germany. Gegenhalter. Technische Daten: Inhalt: 1 St
Beschreibung:DrillproDia4.5115X10X22.23X1.4mmheißgepressteDiamantultra-dünne R Wellsägeblatt für Feinsteinzeug Keramik trocken schneiden aggressive Scheibe Marmor Granit Stein Sägeblatt Seidenpapier in einer BoxSpezifikation:ModellJL3005.3-IVDurchmesser115mmLochdurchmesser22.23mmDicke1.4mmSchnittbreite10mmMatrixmaterial65MnDiamantkorngröße60-70ObjekteschneidenKeramik,FliesenuswEigenschaften:Ultradünne,verschleißfeste,schnelleSchnittgeschwindigkeitundkleine AbplatzkanteAnwendbareIndustrien:keramischeVerarbeitung,Bindemittel,Metalllegierung, Produktionstechnologie, Sintern.AnwendbareModellle:Marmormaschine,Tischschneidemaschine,Eckschleifmaschine,etc.Lieferinhalt:1XheißgepressterDiamantSägeblatt MehrDetails:
Beschreibung Maul-Gripzange Mit Drahtschneider. Technische Daten: Backenform: Gerade mit Prismenaussparung Produktabmessung, Länge: 175 mm Zangen-Typ (Kategorisierung): Gripzange
Two hip pockets and two zipped chest pocketsTwo back pockets one with zip fasteningRule pocketMachine washable and industrially launderableInside leg: Regular (R) 30ins Tall (T) 33ins245gsm 67% polyester/33% cotton