Kostenlos
Unterstützung
Dieses stylische Hoodie mit großer Kapuze fühlt sich dank UA Tech Material wahnsinnig angenehm auf der Haut an und trocknet schnell! Das Under Armour Tech 2.0 Graphic Hoodie Women verleiht Dir durch die große Under Armour Grafik einen super Look beim Workout.Größenauswahl-Hilfe: Model mit 170 cm Größe und 60 kg Gewicht trägt Größe SMGrößenauswahl-Hilfe: Model mit 161 cm Größe und 72 kg Gewicht trägt Größe LG Eigenschaften:Material: 100% PolyesterPassform - Fit: Körpernah geschnittenGrößenflag: Fällt normal ausPflegehinweise: Maschinenwäsche, keinen Weichspüler benutzenLoose Passform: Großzügiger Schnitt mit voller Bewegungsfreiheit und einem weiten, lockeren SitzHeatGear bei Hitze: Die Kleidung von Sportlern muss innen trocken bleiben, darf nicht schwer sein und muss für eine gleichbleibende Körpertemperatur bei drückender Hitze, bitterer Kälte und allen anderen Wetterlagen sorgen. Egal welche Gegebenheiten - und egal welcher Sport - das Programm ist einfach: Heatgear® bei HitzeSuperweicher melierter UA Tech Stoff für unglaublichen Tragekomfort - jeden TagDas Under Armour Tech-Gewebe trocknet schnell, ist ultraweich und fühlt sich sehr natürlich anFitted Passform: Etwas eng geschnitten, um sich dem menschlichen Körper besser anzupassen, aber ohne einzuengen und ohne Kompressionsitz Das Material transportiert den Schweiß vom Körper weg und trocknet besonders schnellGroße Kapuze mit verstellbaren ZugkordelnAufgerollte Seitennähte für eine bessere Passform und PerformanceDie Raglanärmel mit Bündchen an den Enden bieten unbegrenzte Bewegungsfreiheit und einen top SitzGroße Under Armour Grafik mittig auf der Brust aufgedrucktKleines Under Armour Logo mittig am Nacken aufgedruckt
Goatskin construction. Semi Punched Goatskin. Integrated soft Polyurethane knuckle protectors.
Material
Jersey Holl stretch fabric vest External polypropylene perforated and corrugated plates Inner core in Nidaplast and Crash Absorb
Performance shock
Back protector certified Cat. II - EN 1621.2/2003 lev. 1 Back protector certified Cat. II - EN 1621.2/2014 liv.1 Standard
Comfort
Airnet Imola 3D for the comfort
Temperature adjustment
External perforated pads Internal Nidaplast with perforated structure
Back protector certified Cat. II - EN 1621.2/2003 lev. 1 Directly from the racing world. On the track, the maximum riding performance is ensured only when the rider is completely concentrated without worry of injury in case of fall. Dainese® has always provided its champions with the latest state of the art in terms of safety and then transferred this technology to products for the public at large. Back protector homologation is the final step in making the same protectors used and tested by champs like Valentino Rossi available to motorcycle riders everywhere. The homologation of back protectors to EN 1621.2/2003 Standard means that they have successfully passed a maximum impact force transmissible level before sale. The Standard assesses protectors at two performance levels after receiving a series of impacts from a striking force in a predetermined area. - Level 1: limit of 24 kN per single impact, 18 kN for the average of all impacts - Level 2: limit of 12 kN per single impact, 9 kN for the average of all impacts.
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.
Features
top quality black-tech look large velcro surface for secure mounting
Features
Highly technical jersey in 3d breathable fabric. Ergonomic fit with wide micro-mesh areas on the sides for maximum thermal comfort.