Kostenlos
Unterstützung
The band clamp is suitable for assemblies made of wood, plastics and non-ferrous metals, but it can also be used with ferrous metals when firm all-round clamping which will not damage or distort the work is required. Because the tape is tightened evenly from both sides, pressure is uniformly distributed all round or at each corner, thereby preventing distortion on one side. Self locking occurs automatically as the strap is tightened. This ensures consistent tension, which is maintained until the strap is released. The Vario-angle adapt automatically and infinitely variably to any angle from 60° to 180° . Clamping Range Up to 7mBand Width & Depth 25mm x 1mm Angle 60 / 80 DegreesWeight: 0.53Kg
Socket Tray Herramienta de almacenamiento de garaje multifuncional Soporte para rack Organizador de plásticos para el hogar Accesorios Soporte de estante Reparación del hogar
The IRWIN Jack Xpert range of handsaws have evolved into super-efficient cutting tools that have University verified technology at their heart. This triple-ground tooth technology (TGT) not only increases efficiency but also optimises cutting performance on both the push and pull strokes - so you dont have to work so hard. Hardpoint tenon saw with soft-grip handle for user comfort. The ideal choice for fine carpentry and can be used with a mitre box.Size: 300mm (12 in).Teeth 12 tpi
This Forge Auto Gate Latch will automatically latch when the gate is pulled to the closed position. Ideal for gates in fields where easy access is preferred over security. Also used widely for garden gates. Supplied with all fixings and fitting instructions. Fitting Instructions:1. Position the keep on the fence post and mark the fixing holes with a pencil. Drill pilot holes with a Ø2mm drillbit and fasten in place using screws provided.2. with the gate closed, position the latch arm so that it is engaged in the lock and screw into position using the fixings supplied.Finish: Black Powder coated.
Hochwertige Laser-Kunststoff-Schablone zur Gestaltung von Textilien, DIN A3. Motiv: Papagei Anleitung: - Die Schablone auf der Rückseite mit Haftspray einsprühen und auf einem Textil Ihrer Wahl platzieren. So verrutscht die Schablone bei der Arbeit nicht und die Farbe wandert nicht unter den Kunststoff. - Die Textilfarbe mit einem Stupf-Pinsel oder Spachtel auftragen. Hierzu empfehlen wir unser...
