12V-24V 1W Bedside Wall Lamp Interior LED Reading Spot Lights with Switch For Boat Caravan/RV Motorhome

The all new Comp 8 boot was designed and engineered to provide superior support and protection in a comfortable package.
DESIGN AND FUNCTION
Instant step in comfort with minimal break in Controlled ankle support with Zero Bulging Sleek medial design with an integrated rubber burn guard for a precise connection with the bike Instinct buckle system with 2 into 1 lower strap design Injection molded plastic shin plate, calf guard, medial and toe cap Premium foam ankle support with suede anti-slip in heel to keep foot in place Exclusive Fox Duratac outsole Integrated steel shank in midsole for added support

Features
ergonomically adjusted cut Ventilation inserts additional padding and ankle patches elastic inserts on the fingers and back of the hand Anti-slip printing on forefinger and middle finger
Safety
carbon-hardcase with ventilation above the knuckles palm protector double layer leather velcro fastening at the wrist and the cuff reflective elements on the cuff
Material
high quality cowhide
Upper
92% Leather 7% Polyamide 1% Others
Lining
100% Polyester

Specification;Material:PlasticQuantity:2 PCSColor:Black (no paint)Installation Site: Tire sidesSize:61cm x 14cm (L x W)Product Name:Rear Wheel FenderFeatures:1.Easy installation.2.According to original factory specifications, perfect match to original car.3.High-quality plastic material, light weight, stable characteristics,high reliability.4.Protecting your car far from muddy,dirt, sand and other direct impact outside the paint.Fitment:For Volvo XC60 2018-2019(The Compatibility Is Just For Reference.Please make sure this item fit for your vehicle before purchasing.)Package included:2 X Rear Wheel Fender1 X Set Installation ToolNote:1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3.Instruction is not included.Professional Installation Is Highly Recommended!!If you want to know how to use or install it,please contact us by Email.We will provide help as much as possible.

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

LS2 FF327 Challenger
UV-resistant layer security certification 3 bowls made of HPFV
Shell sizes
LS2 offers multiple case sizes, custom-sized EPS protective films and our high-performance, high-quality comfort filler as well as 3D laser-cut plastic foam for a perfect fit and comfort throughout the day.
It is made from HPFC
The high performance fiberglass composite material consists of carefully layered layers of a unique resin preimpregnated fiberglass fabric to form a tough, ultra-light and inflexible casing or shell that disperses impacts in a safer manner.
Cooling system
LS2 helmets have a so-called "Dynamic Flow-through Ventilation". Multiple adjustable inlet ducts and EPS damping with air ducts in conjunction with the rear spoiler and exhaust ducts provide permanent ventilation to provide the driver with cool and comfortable conditions.
Metallic security badge
This small metallic triangle is an exclusive LS2 feature, which additionally strengthens the connection of the helmet band with the helmet.
Quick release
The metal buckle combines with a high-quality chin strap with a plastic tongue with teeth. When closing you hear a soft "click". As far as locking until you reach a comfortable but tight seat. Pull the ribbon to unlock the tongue. Further adjustment options are provided by the chinstrap on the side of the metal buckle.
Emergency release system
Our emergency release system allows the emergency service to remove the helmet pads and thus create an additional space for helmet removal with minimal movement of the injured person s head and neck. It is recommended that someone holds the helmet to avoid movement when removing the padding. Slide your finger into the red ribbon and gently pull on it to remove the pads. Slide the side pads over the straps and remove them from the helmet.
Visor
LS2 visors are made from 3D optically correct "A-class" polymers, a space exploration polymer with high resistance to impact energy and maximum visibility. Our visors are stable, scratch-resistant and UV-resistant. All this combined with the ultimate PINLOCK technology provides the most advanced anti-fog standard.
Quick disassembly system
This system (patent pending) simplifies the change of the visor with the bare hands. The spring detent built-in with detent pin secures a perfect fit without air gaps when the visor is closed.
Comfort lining
All LS2 helmets have removable and washable inner lining to keep them fresh and new. Our anatomically designed cheek pads are based on LS2 s 3D laser technology for a perfect fit. We use hypoallergenic substances, which carry away the moisture, in order to ensure the driver always pleasant conditions.
Chinguard
A high-quality fabric placed in front of the chin reduces the airflow in the driver s face and makes it easier to drive. The chin guard is removable when hot.
Hypoallergenic
We use hypoallergenic substances that support the moisture transport and ensure a comfortable fit.
Laser cut upholstery
Foam with different densities is laser cut in 3D and adapts perfectly to the driver s head shape.

The SP ConnectTM Moto Mirror Bundle lets you mount your smartphone to your scooter or motorbike in seconds. Fasten the Mirror Mount to a mirror of your scooter or crossbar of your motorcycle and you are ready to mount the SP ConnectTM Phone Case (or Universal Interface) by placing it on the mount and turning it 90° clockwise. Your mobile phone is securely positioned right in your field of vision, allowing you to navigate, access your playlists or read messages. Use the Weather Cover to protect your phone from rain and dirt as well as to provide additional shock resistance if necessary. Included
1x Phone Case 1x Weather Cover 1x Mirror Mount 3x Plastic spacing inserts 1x StandTool 1x Microrail Adhesive
Phone Case
Slim, protective, functional Use of all ports and buttons 3-layer case construction for ultimate safeguarding
Weather Cover
Protects against rain, sweat, dust or mud Adds shock resistance to your phone
Mirror Mount
Low profile Portrait / Landscape Orientation 360° rotation Fits most motorcycle mirrors ( Ø 10 - 16 mm or 0,39 - 0,63 inches )
Note Thick screen protectors or gloves can limit the usability of your touchscreen in combination with the Weather Cover. The Weather Cover can further affect the homebutton functionality of iPhone 8, 8 Plus, 7 & 7 Plus. This can be compensated by enabling the software homebutton (Assistive Touch). *example picture