Rawlplug Brown Uno Plugs Pack of 1000 7mm x 30mm

Double ended screw removers for use with a reversible drill to remove damaged screws, machine screws and broken bolts from wood, metal and plastic. This set can be used on Pozi, Phillips, Slotted, Hexagon, Torx, Tri-Wing, Frearson and most Tamper Resistant Screws.

Style:Contemporary; Finish:Electroplated; Faucet Type:Premium High Pressure Dual Shower,Body Jet Massage,Pressure Balancing valve,Thermostatic Mixer valve,Rainfall Shower Head System,Shower System; Installation Type:Mount Outside; Number Of Handles:Single Handle; Cold and Hot Switch:Yes; Valve Type:Ceramic Valve; Handshower Material:Stainless Steel; Faucet Body Material:Brass; LED Power Source:Water Flow; LED turns Blue between:0-38; LED turns Green between:0; LED turns Red between:41; LED begins flashing between:41; Rain Shower Included:Yes; Shower Arm Included:Yes; Handshower Included:Yes; Bodysprays Included:Yes; Valve Included:Yes; Handle Material:Zinc Alloy; Drain Included:Yes; Brand:Sprinkle; Features:Rainfall Shower,pullout,LED,Handshower Included,Waterfall; Shipping Weight:6.760; Net Weight:0.000; Listing Date:10/19/2020; Production mode:Self-produce; Special selected products:COD

Arrow T18 wire cable tacker with all steel construction, the chrome finish resists wear and tear. The grooved driving blade and grooved guide ensures perfect stapling with jam resistant mechanism and a short span easy compression handle. Designed to accommodate smaller wires and cables up to 5mm diameter, suitable for telephone, intercom and burglar alarm wiring. The T18 takes 3/16 x 3/8 leg (ARRT1838) & 3/16 x 7/16 leg crown staples (ARRT18716)

The Stanley Hobby paint brush has pure black bristles and a rust resistant ferrule. The yellow polypropylene handle is shaped for comfort.Size: 100 mm (4in).

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

BlueSpot 20 piece cleaning and polishing set comprising the following: 3 x 1in Polishing wheels.1 x Polishing compound.1 x Felt polishing wheel with shank.3 x Nylon brushes: 7/8in, 1/2in, 1/8in nylon brush.1 x 7/8in Steel brush.2 x Mandrels.2 x 7/8in Emery polishing wheels.1 x Felt polishing tip.6 x 1/2in Felt polishing wheels.