Marine Boat Yacht LED Starboard/Port/Masthead/Stern/360 Navigation Light Set

Helmet Technology
Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, quick release screw on face shield that is optically correct, compound-curved, scratch-resistant and protects against UV-rays Ventilation: 10 points of aerodynamically designed flush fit ventilation with chin, top, rear, and unique side extraction vents. 5 intake vents and 5 exhaust vents Inner sun shield: Smoke tinted inner flip down sun shield system with left side slide lever Visor: A removable and adjustable (40mm) screw-on visor 7 in 1: Helmet can be configured one of seven different ways. Ships with all parts included This helmet model meets or exceeds both ECE 22.05 and DOT FMVSS-218 motorcycle helmet safety standards Retention system is microlock (quick release) A clear coat finish to protect paint & graphics A large-size FX-55 weighs 1.68 kg or 3.69 lbs
Removable, washable and custom sizable Interior AFX helmet liners and cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable and washable. The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness and cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner and cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block.

Helmet Shell & EPS Size XS-M L-XXL



XS S M L XL XXL

Check Pad Thickness (mm) 40 36 32 28 24 20

Comfort Liner Thickness (mm) 12 10 8 10 8 6

Description:1. Remote control, convenient and easy to use.2. The bottom inner has two strong magnets , can be adsorbed on the boat or car below 30km/h.3. 360 left right rotation, 120 up down ratation, provide all-dimensional lighting.4. IP56 waterproof and dust-proof, can be used in the rain or harsh environments.Specification:ProductRemote Control Searching LightModelSG5K-50W-01MaterialToughened Glass + ABS +PC+ AlloyLight SourceLEDVoltageDC 12VPower50WLumens4,000LMLight Range300-500 metersWaterproof RateIP56Lifespan2,000-3,500hrsWorking Temperature-40℃ ~ +105℃Remote Operation RangeWithin 10 metersRemote Power Supply1 X 1604D 6F22 9V Battery(Included)Size18X18X17.5cmGross Weight3.3KgApplication for:1. Off-Road vehicles: ATVs, SUV, UTV, truck, Fork lift, trains, boat, bus, and tanks.2. Engineering vehicles: Excavator, dozer, road roller, bulldozer, crane and mining truck, etc.3. Other vehicles: Fire engine, police cars, rescue vehicle, communication vehicle, military command vehicle, etc.Operation:1. Turn on the power of the remote. The power switch is at the left side of the remote.2. Press lamp on button once, the lamp will turn on steadily. At this time, you can adjust the direction of the light beam by pressing the direction button.3. To turn off the lamp, just press off button once.Remote duplication:1. Press bothandbutton simultaneously on the remote within 2 seconds after power on the main unit.If the light on themain unit flashed once, the code learning complete

* Chopper Figure * Clip with Wire * Available in 4 different Designs | Article: Booster Chopper Clip | Article: Booster Chopper Clip

Specification:Color: BlackMaterial: RubberDiameter: Approx. 58mm/ 2.28Number of Blades: 6Fitment:Compatible with: For Yamaha outboard motor part 688-44352-03This part suits the following engines:For Yamaha 2 stroke outboard motorsC75 HP (1994-1999)E75 HP (1995-2000)70B (2004 on)75A75CP75 HP (1996-1999)C80 HP (1997)80A85 HP (1985)C85 HP (1989-1997)Package Included:1 X Water Pump Impeller

The Macna Vosges is the successor to the highly successful Jura jacket and is the ultimate hybrid motorcycle jacket! Why? Well, the jacket has a 3-layer system with a removable Raintex membrane and thermal lining. In this configuration you have a nice warm in the winter. Is it summer? Then remove the mebraan, thermo liner and then open the large ventilation panels on the chest, ventilation zips on the arms and on the back for a cool riding wind! Night Eye A next step has been taken in visibility for motorcyclists. The Equator Night Eye Dark features tiny glass particles on the Night Eye fabric that act as small satellite dishes and reflects the light beam back to the light source. Even though a car at a great distance, Night Eye lights up immediately as soon as the light rays of a headlight come into contact with the material. Comfix The Vosges is also equipped with the Comfix system, a collar closure that clicks like a printer but can be attracted as a band. A sturdy, precise system without the use of scratchy Velcro. Features
Made of Durylon and Poly 500 3-layer system with removable Raintex membrane and thermal lining With Side Eye reflection on the chest and back you are particularly visible Air panels on the chest, air inlet in arms and air outlet on the back Safe tech CE Protection on the shoulder and elbow. CE back protector prepared Comfix Coat hanger Adjustable straps on the arm Easy cuff Back Pocket Grip strips Long and short connection runs Hot vest prepared Windcollar prepared
Suitable with the macna Windcollar Jacket size S / M = wind collars S Jacket size L + = wind collars M * "brighter view" represents the night-eye effect

Feature:1.NON-SLIP: The black car seat cover really clings well to the car seat upholstery to keep the covers in place. That along with the straps and clips also ensures the front car seat cover stay put well2.PREMIUM PU LEATHER MATERIAL: Super soft and comfortable to touch,four seasons applicable.Waterproof and easy to clean.3.EASY TO INSTALL: Use straps with plastic buckles and sew it into the seat covers directly, the universal car seat covers are a breeze to install and will fit the majority of vehicles on the road. These car seat covers are also easy to clean; simply wipe it with wet towel. NO TOOLS REQUIRED4.CLASSIC DESIGN: PU Leather Car Seat Cover provide a fairly sleek look to your car and protect your seats from dirt, dust and stains, won’t decrease the value of your car for further damageSpecification:Set9 piecesMaterialArtificial leatherColorBrown, Gray, BeigeSizeSeat cover: 30 * 27cmFront seat: 118 * 56cmBackrest: 135 * 76cmRear seat cushion: 135 * 56cmPackageIncluded:5 X Seat Head Cover2 X Seat Front Seat1 X Backrest1 X Back Seat Cushion1 X Bag Of Hooks