Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/2 in Shank.Angle A = 90° D = 12.7 mmC = 25 mm
The Facom JET.C4M4 Tool Chest 4 Drawer is a tough, durable storage system, featuring a large amount of storage space and protection. The chest can be stacked on a rolling chest of same dimension, and is supplied with a linking kit for easy and secured fitting of the unit. The Tool Chest has the following drawers, each able to hold 4 modules: 3 x 60mm high drawers and 1 x 130mm high drawer. Specification Capacity: 16 Modules. Total Load: 105kg.Storage Volume: 100 litres.Weight: 51.5kg. Overall Dimensions: 96.4 x 54.6 x 48cm.Effective Drawer Dimensions: 56.9 x 42.1 x 60-130mm.
The Faithfull Tubular steel foresters bowsaws give equally good cutting performance on dry timbers as well as green wood and are suitable for gardeners, builders, farmers and DIY etc.Sharp taper enables ease of access amongst branches and undergrowth.The lever tensioner allows easy blade replacement. Supplied with protective plastic blade sleeve. Blade length: 530mm (21 in).
Self-guided trimming bits. Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges D = 9.5 mmC = 12.7 mm
Paslode IM65 chisel point brads for Impulse IM65 F16 gas brad nailer. Electro galvanised light duty protection F16 gauge lost head 1.65mm wire brads glued, supplied with Paslode Special Impulse gas fuel cells which drives up to 1,000 brads per cell.Electro Galv: Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.
