When the memo came through that skulls were no longer cool, we tore it up, laughed, and then put a goat skull on our Merc Cloven jacket. We then drew a pentagram on the floor and chanted out an arcane song to the west wind. Such is the life in the ICON office. If you like goats, you will love this jacket. If you really, really like goats (or sheep), then that’s between you and them. No judgment here. Features ICON® relaxed fit Stretch woven polyester softshell chassis D3O® removable back, elbow, and shoulder impact protectors - EN 1621-2:2014 / EN 1621-1:2012 Heavy weight ballistic panels, Streamlined SPORTCUFF™ Fit Our relaxed fit jackets are designed with a loose and longer fit so that it can be worn by those with a full frame and over a jacket or sweater. Waterproofing The fabric has a polyurethane coating and contains no exposed zippers, vents, or mesh to keeping you dry in light rain and average snow. Conditions Hot to Mild - Ventilation where you need it results in premium gear with maximum air flow and breathability for hot to mild riding conditions. Construction This hoodie may look casual, but it’s all business. The reinforced soft-shell construction is tough and paired with reinforced Nylon paneling, come through in a tumble. D3O® Impact Protector Package Shoulders, Elbows, & Back Includes a full suite of industry-leading D3O® Impact Protectors (shoulders, elbows, and back). D3O® unique technologies provide both enhanced protection and a versatile, flexible material for a host of shock absorption and impact protection. Delivering the most flexible and discreet protection on the market, D3O® consistently outperforms traditional foam-based materials.
Spidi MOTORSPORT is a vintage style leather jacket for custom and streetbike use, also very good for short to mid range touring. Technical features: Arrangement for internal Lady protector Biomechanic protectors 60g/m2 removable insulating liner Clip stop for casual pants attach Adjustable waist fastening Zip to reduce volumes Highly fitting cowhide with 0.6/0.8mm thickness High visibility reflex areas
Description: 1. A pair of universal replacement 12V shell horns. With universal mounting brackets, installation is simple. No additional work is required. Can be used as direct replacement to the snail shell design or round horns.2. Some cars may have a plug fitted to the horn which you need to replace with 2 spade terminals, but in most cases these horns will fit on to your car with nothing else required.Specification:12V Dual Tone Snail Air Horn (1 Pair)110DB Rating: LOW 410HZ HIGH 510HZDimension of single horn (approximate): Diameter:8.5 cm Depth: 7.5 cmFitting instructions includedEasy to installTo be used only for 2 terminals versionSuitable for cars, van, bikes and boats with 12V power supply Package Included: 2 X 12V Air Horn
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Features 100% waterproof and breathable insert Palm reinforcement Double tightening wrist AC³ (Aqua, Cold, Crash, Comfort) Aqua: 5 of 5 points Cold: 5 of 5 points Crash: 3 of 5 points Comfort: 4 of 5 points point system on manufacturer base.
